Colored laser engraving paper and marker for laser engraving tools with ultraviolet laser from carbon dioxide fiber for stone tile, crystal, glass, and ceramic

Colored laser engraving paper for fiber and UV laser engraving tools machine for ceramic and tile of crystal glass Please note that it cannot be used on any metallic surface, such as aluminum, stainless steel, iron, etc. Why do you need it? Direct engraving on glass and ceramics, etc. may fail and cannot be colored, while laser engraving for colored paper is the optimal solution for those problems. Please pay attention. The colored engraving requires high demands on laser parameter settings and system. For fiber laser engraving machines, diode laser, UV laser, and CO2 laser, the CO2 laser engraving machine works best. Since different laser devices, different materials, and different colors of engraving paper require different parameter settings, we cannot give users specific parameter values. Users need to adjust the parameters through testing to achieve good engraving results. If you are not very professional, we suggest you buy black color to try first, because black is easy to color. Compatibility: Compatible with almost all laser engraving machines, such as CO2 laser engraving machine, fiber laser engraving machine, UV laser marking machine. Color change: Some colors may change after laser engraving, so the paper color may look different from the actual color, and the real color will be seen on the back. Please consider the specific color. About quality: All engraved colored papers will be well packed, but due to long international shipping, some slight creases or air lines may appear. Please do not worry, this is not a quality issue and will not affect the engraving. Custom size: With a large size, you can cut the size as needed. Support paper: 39 cm × 27 cm (15.35 inches × 10.63 inches). Colored paper: 36 cm × 24 cm (14.17 inches × 9.84 inches). How to use? Please check the videos or follow the pictures. Step 1: distinguish the front side. Keep the color side facing up when sticking, the front side must face up. Step 2: cut the colored paper. Cut the size according to the engraving content. Step 3: soak the colored paper. Place the cut colored paper in water and moisten for 1-2 minutes. Remove the colored paper from the back after soaking. Step 4: stick to the object. Keep the front side facing up and use a spatula to remove air bubbles and wrinkles. It is essential to buy a spatula together. Dry the colored paper with a hairdryer before engraving. Step 5: prepare for engraving. Place the item on the engraving machine and set the engraving pattern. Pay attention to the pattern direction; you may need to flip the pattern if engraved horizontally. Step 6: start engraving. Wait for the engraving process to complete. Step 7: soak the colored paper. Soak it in water for 5 minutes after engraving. Full soaking helps peel off excess colored paper easily. Step 8: remove excess colored paper. Take out the soaked object and carefully remove the excess colored paper. Step 9: display the product as you like. Compatibility: Compatible with almost all laser engraving machines, such as CO2 laser engraving machine, fiber laser engraving machine, UV laser marking machine, semiconductor laser.