Drill 26 mm Hilti Makita 800 watt HR2630

Makita HR2630 drill, 26 mm hammer drill, HR2630 from Makita, powered by a strong 800-watt motor providing 1200 RPM. This hammer offers 3 operating modes (hammer, hammer with rotation, and rotation), with a switch lever for easy mode switching. The rotary hammer also features a handle designed ergonomically with a soft rubber grip that fits the hand size to provide maximum control and comfort. Additionally, it has double insulation to protect the user, a variable speed feature that allows the user to control the speed, a torque limiter that reduces gear damage, reverse rotation for quickly removing screws and other fasteners, and a dust collection feature that helps maintain a clean work environment. Powerful features: Double insulation: Double insulation is a method of protection against electric shocks, consisting of an additional layer of insulation over the primary insulation or live parts. Double-insulated devices protect the user through two independent insulation systems. These systems protect the electric motor components from the outer motor housing and tool mounting areas. Variable speed: Variable speed control allows the user to match the speed with the application being performed. Forward and reverse switch: After drilling, adjusting the direction switch counterclockwise causes it to rotate counterclockwise to help it exit the hole cleanly and easily. The reverse mode is also used to quickly remove screws and other fasteners. Torque limiter: The torque limiter reduces gear damage by disengaging the gears if the bit gets stuck in the wall. Dust collection system: The dust collector is designed to reduce the amount of dust produced during cutting and concrete dust generated during drilling at the work site, enabling you to work efficiently and comfortably. Features include an easy-to-hold handle ergonomically designed to provide maximum pushing force and better control. It has 3 operating modes (hammer, hammer with rotation, rotation). It features minimal vibration. A one-touch sliding drill bit head for easy bit changing. Equipped with a lever at the bottom of the gear housing to reduce the risk of breakage. Compatible with SDS-PLUS shaft.