Soft polish mixed with T3 from Cush Chemical 250 ml Micro Cut+FINISH P3 250ml

Soft polish mixed with P3 from Koch Chemie 250 ml Micro Cut+FINISH P3 250ml Get ready to give an ideal appearance and deep shine to your car paint with P3.01 Micro Cut and Finish from Koch Chemie! This product features innovative technology that removes fine scratches, swirls, and light corrosion marks, leaving a wax layer of carnauba that provides long-lasting protection and unmatched gloss on the car surface. Whether you are a professional in car care or looking for an easy-to-use product for a stunning finish, P3.01 is the perfect solution to restore your car's shine and make it look like new....Get it now at the best prices....Specifications of the soft polish mixed with P3 from Koch Chemie: Product name: Fine soft polish with carnauba wax for polishing and scratch removal Micro Cut & Finish P3.01 Category: Car care, general polishes, car cleaning tools, polishing compounds, fine polishing compound with carnauba wax, exterior polishes, paint protection, car wash, fine polishing compound with carnauba wax, P3 from Koch Chemie. Brand: Koch Chemie. Product code: P3.01. Advanced polishing technology. Polishing formulation with carnauba wax. Removes scratches up to P3000. Long-lasting isolation. High gloss and smoothness. Compatible with all types of paint. Versatile. Suitable for various surfaces. Economical. Easy to polish and remove. Safe on different types of paint. Easy to use. Hardness: 3.2. Gloss: 9.5. Product features: Micro Cut & Finish P3.01 is a high-quality product used in surface treatment of cars or surfaces requiring high precision in smoothing and polishing. It is characterized by its ability to remove small scratches and deformations on surfaces without significantly affecting the paint layer. Mainly used for final polishing and giving the surface a final shine. Removes fine scratches and swirls to achieve a smooth and glossy surface, providing a shiny finish and a protective layer for the paint. Micro Cut & Finish is a new generation of micro polishing compounds for devices, ensuring permanent removal of lines, holograms, fine scratches, and sanding marks up to P3000 grit on all paint systems (including scratch-resistant systems), with long-lasting protection and high gloss and smoothness. By using highly specialized and homogeneous abrasive bodies, a durable glossy finish is created under harsh lighting conditions even on dark and sensitive colors. It mechanically removes holograms and fine scratches rather than covering them as some products do. Micro Cut & Finish is economical, easy to polish and remove without leaving traces. Contains carnauba wax and non-volatile silicone. Versatile, suitable for treating paint on cars, commercial vehicles, motorcycles, etc. Safe on various types of paint and suitable for use on new and used cars without damaging the paint. Easy to apply either manually or with a polishing machine, giving a bright and glossy appearance similar to that achieved in car care centers. Usage recommendations: For best results, it is recommended to use the Micro Cut Pad and a rotary polisher with forced rotation (such as Makita PO5000C at maximum speed). Alternatively, a rotary polisher with a Micro Cut Pad can be used. Before use, fully moisten dry or new pads with the compound. With the device turned off, evenly apply the polish to the surface to be treated, then polish with moderate pressure in a transverse motion. Then, polish with low pressure. Do not use pads used with this product with other products. To remove residue without scratches or wrinkles, it is recommended to use Profi microfiber cloths made of non-woven microfibers and ultrasonically cut. Warnings: Please shake the product before use. Check the suitability and compatibility of the product before use. Do not use on hot surfaces. Keep away from frost and excessive heat.