Mafra Headlight Restoration Kit Hobby

Refurbished headlights from Mafra:

• Yellow headlights when they lose their shine are not only unattractive, but they also endanger your safety, especially when driving at night.
• Mafra has a cure for this problem.
• Headlight Renewal Kit is specially designed to clean and maintain headlights
• The lights that are extinguished by environmental pollution can be returned as new by removing the traces of impurities attached to the plastic during the time.
• The best way is to use the sandpaper in the package in its degree to get the desired result and remove the yellowing of the lamps.

The set includes:

• Headlight polish pack 80gm
• sanding base
• Seven sandpaper, three of which are very soft
• 
  

How to use:

• For this process, you will need a bucket of water, a microfiber towel and a glass cleaner (we recommend using a split product).
• Wrap the parts around the headlights with paper tape to not scratch the car paint
• Dip all the sandpaper in the package into the bucket of water
• Use the red paper (the coarsest) with the sponge backing in the kit after spraying the glass cleaner on the lamp to act as a lubricant while sanding.
• Sand the lamp in a steady horizontal movement back and forth and then in a vertical movement back and forth (repeat the step until the lamp appears dull and matt uniformly)
• Use glass cleaner throughout the sanding period to use it as a lubricant to facilitate the sanding process
• Use the blue paper (medium roughness) with the sponge backing in the same way as the first stage
• Repeat the step until the lamp appears faint and off, but with a degree of clarity more than the first step
• Use the gray paper (the softest) with the sponge backing in the same way as the previous two steps
• Repeat the step until the lamp appears less faded than the previous steps and until you cannot see scratches due to sanding the lamp with a microfiber cloth.
• Put a little bit of the polish in the set on it, then rub it vigorously with the lamp in a circular motion and repeat the process until you reach the desired purity of the lamps
• After polishing, use an insulator spray to protect the surface of the lamp from sunlight by spraying it directly on the lamp and leaving it for a minute before wiping it with a clean microfiber cloth

To see how to use: