LOKLiK Fine Point Blade Kit

Two precision replacement blades with a blade holder for the LOKLiK iCraft™ cutting machine. This blade is ideal for light to medium materials.

The precision kit includes two replacement blades and a blade holder. With a 45-degree cutting angle, this blade can be used on light to medium materials such as paper, various types of vinyl, stickers, and cardboard. Whether you're cutting fine details or working with different materials, this blade provides the precision you need.

If you want to cut heavier and more durable materials such as synthetic leather and thick cardboard, we recommend the LOKLiK Deep Cut blade.

Note:

These blades are not compatible with the LOKLiK Crafter cutting machine.

The LOKLiK Precision Basic blade uses a different blade holder than the Deep Cut blades.

This blade can be used to cut:

Heat Transfer Vinyl

Adhesive Vinyl

Cardboard

Etc.

How to install a new cutting blade in the LOKLiK iCraft™ machine:

Turn off the machine: Make sure the machine is completely switched off before you begin replacing the blade.

Remove the old blade: Carefully open the blade holder by unscrewing it and remove the old blade.

Insert the new cutting blade: Remove a new precision-pointed blade from its packaging and place it in the blade holder with the sharp side facing down.

Fix the blade holder: Replace the blade holder to secure the new blade.

Test the blade: Turn on the machine and perform a test cut on a scrap piece of material to ensure the blade is properly fitted and functioning as expected.

Care and Maintenance

Store unused blades in a dry, secure location to prevent rust and damage. Regularly cleaning the cutting blade and holder can extend blade life.

Cutting Standards

Download our chart to help you determine the correct settings when using different materials. If your material is not listed, try a test cut using a similar material setting. If you cannot cut the material under maximum pressure, attempt the cut several times.