LOKLiK Deep Point Blade Kit

Two deep cutting blades with a blade holder for the LOKLiK iCraft™ cutting machine. This blade is ideal for heavy materials up to 2.0 mm thick, such as synthetic leather and thick cardboard.

It includes two deep cutting blades and a blade holder. With a 60° cutting angle, this blade can be used on heavy materials, such as synthetic leather, magnetic PVC molding sheets, EVA foam sheets, etc. Whether you're cutting fine details or working with different materials, this cutting blade provides the precision you need.

Note:

These blades are not compatible with the LOKLiK Crafter cutting machine.

LOKLiK deep cutting blades use a different blade holder than the standard blades.

This blade can be used to cut:

Synthetic leather

Shrink-resistant plastic sheets

PVC moldings

EVA foam sheets

Magnetic sheets

...

How to install a new cutting blade in your LOKLiK iCraft™ machine:

Turn off the machine: Make sure the machine is completely switched off before you begin replacing the blade.

Remove the old blade: Carefully open the blade holder by unscrewing it and remove the old blade.

Insert the new cutting blade: Remove a new deep-cut blade from the packaging and place it in the blade holder with the sharp side down.

Secure the blade holder: Reinstall the blade holder to secure the new blade.

Test the blade: Turn on the machine and perform a test cut on a scrap piece of material to ensure the blade is properly fitted and functioning as expected.

Care and Maintenance

Store unused blades in a dry, secure location to prevent rust and damage. Regularly cleaning the cutting blade and holder can extend their lifespan.

Download our chart to help you determine the appropriate settings when using different materials. If your material is not listed, perform a test cut with a similar material setting. If you cannot cut the material under maximum pressure, try cutting several times.