MQ-2 Gas Sensor Module Smoke Methane Butane Detection (Red)

34.50

Product description

Description: This is a common smoke sensor that uses MQ-2 combustible gas and smoke sensor components. The gas sensing material used in this component is SnO2 (tin dioxide), which has low electrical conductivity in clean air. When there is flammable gas in the environment where the sensor is located, the sensor's conductivity increases as the concentration of flammable gases in the air increases. The sensor is highly sensitive to liquefied gases, propane, and hydrogen, and is ideal for detecting natural gas and other combustible vapors. It detects a wide range of flammable gases and is a low-cost sensor for many applications. The sensor is compatible with many microcontroller control panels, such as microcontrollers. We offer a way to use this sensor with the UNO R3 microcontroller. When in use, the A0 terminal reads the analog value of the corresponding gas; the D0 terminal is connected to the LM393 (comparator), allowing us to set the critical point for gas alarm through a potentiometer, and output the digital value at D0. When the measured gas content exceeds the critical point, the D0 pin outputs a low level; when it does not exceed the critical point, D0 outputs a high level. The sensor comes with a white 2.54mm anti-reflective terminal. When in use, it can be connected to the MCU using a DuPont cable. To facilitate wiring, we have designed an expansion board fully compatible with this sensor and the UNO R3 microcontroller. We only need to stack the expansion board onto the UNO R3 MCU and use a 4P XH2.54 double-headed jumper wire (anti-reverse) to connect to the expansion board, which is simple and convenient. The sensor also features 4 mounting holes with a diameter of 3mm, allowing you to install it on other devices. Specifications: Working voltage: DC 5V Control signals: digital (D0) and analog (A0) interface: 2.54mm pitch 4-pin anti-reflective interface Mounting hole diameter: 3mm Size: 45 * 26 * 19mm Weight: 8.1 grams Package includes: 1 × MQ-2 smoke sensor with 4-pin cable (other items not included)

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌