LIQUI MOLY Underseal Black – Black Rubber-Resin Underbody Protection 1 L
75ر.س
Product description
LIQUI MOLY Underseal, Black 1 L
A black, bitumen-free protective coating based on resin and rubber, designed to protect vehicle underbodies and wheel arches against corrosion, stone chips and impact. Also provides good noise and vibration reduction. Remains permanently flexible, offers very high abrasion resistance, does not become brittle in cold weather and can be painted over after drying.
Product Details
- Brand: LIQUI MOLY
- Product Name: Underseal, Black
- Type: Underbody protection coating
- Volume: 1 litre
- Colour: Black
- Composition: Resin and rubber based, bitumen-free
- Country of Origin: Netherlands
Key Features
- Flexible, permanent protection against corrosion and rust.
- Very high abrasion resistance.
- Resistant to aging and does not crack or become brittle at low temperatures.
- Good noise and vibration reduction.
- Excellent adhesion to cleaned, painted and unpainted metal surfaces and PVC.
- Fast drying and paintable after drying.
Usage
- Suitable for protecting and repairing vehicle underbodies, wheel arches, side panels, sills, front and rear sections.
- Used for stone-chip protection and for covering and sealing repair areas, welds and joints.
- Clean the surface thoroughly, remove rust and ensure it is dry and free from wax, dirt and grease.
- Apply using a suitable spray gun at an operating pressure of 2–8 bar.
- A wet coat up to 1.5 mm can be applied to vertical surfaces.
- The vehicle is ready to drive after approximately 1–2 hours; complete drying takes about 12 hours.
- Can be painted over with conventional or water-based automotive paints after drying, following the application instructions.
- Do not spray on moving or hot parts such as the engine, transmission, drive shaft, exhaust, catalytic converter or brake system.
Questions you might have

