Coleston Natural Hair Dye Pomegranate Red Burgundy 4/6 - 1 package

Coleston Naturals Hair Dye Red Burgundy contains strong colored dyeing materials and nourishing serum with natural extracts that vary depending on the nature of the color such as cinnamon extract for brown hair, chamomile extract for blonde hair, pomegranate extract for red hair, and I can choose from many attractive colors for Coleston Naturals dye. Important instructions before dyeing hair using Coleston Naturals Red Purple: 1- Do not use the dye on wet hair and it is preferable not to wash the hair three days before the coloring process. 2- You should wait 5-6 months if you have used henna because the dye cannot penetrate the layers formed by henna on the outer layer of the hair, resulting in uneven colors. 3- This dye is not used for eyebrows. 4- A sensitivity test must be performed 48 hours before coloring or dyeing the hair. 5- For the best desired results, perform a strand test. How to use Coleston Naturals Red Purple dye: 1- Prepare the coloring cream mixture: empty the contents of the tube into a non-metallic dish (made of glass, plastic, or ceramic), then add the developer liquid and mix both with a dye brush until you get a completely homogeneous dye mixture. Apply the dye mixture to your hair immediately after thorough mixing for the best color result. 2- Applying the coloring cream mixture: for first-time dyeing, apply the dye mixture to unwashed hair strand by strand using the dye brush. Make sure to apply the mixture to all of the hair and not leave any part out, then comb your hair with a wide-tooth comb to distribute the dye evenly over all the hair. To dye the roots, divide your hair into sections and apply the dye mixture to each section separately, leaving it on for 20 minutes. Then comb your hair evenly towards the tips. 3- Duration of leaving the product on the hair: leave the product on the hair for 30 minutes, 20 minutes for the roots and 10 minutes for the rest of the hair. The color of the dye mixture may change during this period. 4- Finishing the dye: after the dyeing time, rinse the dye emulsion thoroughly with warm water. To fix the color, apply conditioner to your damp hair, leave it for 5 minutes, then rinse well with water. It gives you the smoothing serum with the healthy appearance you desire. How to perform a skin sensitivity test: must be done 48 hours before coloring: tools needed for the sensitivity test are: cotton, cotton swab, plastic container, plastic spoon. 1- Open the cap of the developer solution tube No. 2 and then open the cap of the coloring cream tube No. 1. 2- Mix a small equal amount of the coloring cream and the developer solution in the plastic container. 3- Quickly close the caps of the coloring cream and developer solution. 4- Place a small amount of the prepared mixture behind your elbow on a 1 cm square area. Leave it to dry without rinsing for 48 hours. During bathing, protect the area with a tight bandage, then remove the bandage immediately afterward. 5- Check the test area after 48 hours. If there is no reaction, you are ready for the coloring process. 6- If a rash, burning sensation, or itching occurs, you may be allergic to one of the product's components, and you should stop using it immediately. Strand test for Coleston Naturals Red Purple dye: perform a color test on a hair strand each time you dye to determine the best timing for highlighting and to achieve the best result, considering that chemical treatments such as curling, straightening, previous coloring, and sun exposure all affect the color result and the required time. Tools needed for the strand test: scissors, tape, and a clock. Steps for the strand test for Coleston Naturals Red Purple dye: 1- Cut a quarter inch of your dry hair that is dark or has a lot of white hair near the scalp, then tape the strand at the cut site. 2- Apply the remaining mixture used for the sensitivity test over the strand completely, then start timing. 3- After 15 minutes, check the strand. If the color is not as desired, return the strand to the plastic container with the mixture and monitor the color periodically until 25 minutes pass. For very light blonde color, a more saturated color, or to cover resistant white hair, you may need to leave the coloring up to 45 minutes. Adjust your highlighting time as follows: the appropriate time for highlighting is -------- minutes. Perform a sensitivity test 48 hours before each coloring, even if you have used coloring products before.