FlexSelf COVID-19 test at home - one piece

FLOVLEX COVID-19 Self-Test Product Description: Flovlex COVID-19 self-test, quick and easy to use, designed for self-testing. Get the result within 15 minutes. Detects infection in people with or without symptoms. Usage instructions: Wash or disinfect your hands, ensure they are dry before starting the test. Read the instructions before using the rapid SARS-CoV-2 antigen test. Check the expiration date printed on the foil pouch containing the strip. Open the pouch, place the test strip on a flat, clean surface. Remove the foil from the top, avoiding spillage. Insert the tube into the opening of the kit box. Open the swab packaging starting from the stick end, do not touch the absorbent tip with your hands. Insert the entire absorbent tip into one nostril, gently rotate the swab, insert it less than 2.5 cm from the edge of the nostril opening. Rotate the swab 5 times, wiping it against the inner surface of the nostril. Remove the swab and insert it into the other nostril. Repeat step 9. Remove the swab from the nostril. Insert the swab into the test tube, rotate it for 30 seconds. Rotate the swab 5 times while pressing the sides of the test tube. Remove the swab while pressing the tube. Securely attach the dropper tip into the reagent barrier tube. Mix the solution well by shaking the bottom of the tube or rotating it. Gently press the tube to dispense 4 drops of the solution into the sample well. Start reading the result within 15-30 minutes. Once the test is complete, dispose of the kit. Result interpretation: Negative test result: Only the control line (C) appears, while the test line (T) does not appear. A negative result indicates that it is unlikely you are currently infected with COVID-19. Positive test result: Both the control line (C) and the test line (T) appear. This means SARS-CoV-2 antigen has been detected. Note: The appearance of any faint line in the test line (T) area should be considered a positive result. Absence of the control line (C): Possible reasons include insufficient sample taken or improper procedure, resulting in an invalid result. Review the instructions again and repeat the test with a new strip. If invalid results persist, contact your doctor or a COVID-19 testing center. Warnings and precautions: Read the package insert containing the rapid test. Do not use the test after the expiration date printed on the pouch. Do not eat, drink, or smoke before or during the test. Do not use this test if the pouch is damaged. All tests, samples, and potentially contaminated materials must be disposed of according to local regulations. Humidity and temperature can negatively affect the results. Do not collect nasal swab samples if you have a nosebleed. Wash your hands thoroughly before use. If the reagent barrier contacts the skin or eyes accidentally, rinse the area with plenty of water and seek medical attention if necessary. Keep the test kit out of reach of children and animals. Avoid nasal spray 30 minutes before collecting the nasal swab sample. Components: Test strip. Reagent barrier tube. Single-use swab. Waste bag. Test tube holder. Package insert.