لميتسوبيشي الكسوف الصليب باجيرو الرياضة ميراج 2014-2024 TPMS 433MHz سيارة مستشعر ضغط الإطار 4250C275 S180150004

446.49

4PCS | China Mainland
1PCS | China Mainland

Product description

<kse:widget data-widget-type="customText" id="24821866" type="relation"></kse:widget>

Selling Point

Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.

Note2:
【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : OBDII required
Installation of TPMS is recommended to be performed only by trained professionals.


SPECIFICATION :
Replace For Part Number:
4250C275,S180150004

Battery Life: ABOUT 3YEAR
Operating Frequency: 433MHz


PACKAGE CONTENT :
NORMAL PACKET



COMPREHENSIVE VEHICLE COVERAGE

Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

Application

FOR Mitsubishi Attrage(from 2014-01 to 2022-02)
FOR Mitsubishi Eclipse Cross(from 2017-09 to 2023-12)
FOR Mitsubishi Mirage(from 2013-02 to 2022-03)
FOR Mitsubishi Pajero(from 2014-07 to 2025-01)
FOR Mitsubishi Pajero Sport(from 2014-06 to 2016-04)
FOR Mitsubishi Pajero Sport III(from 2016-05 to 2024-06)

FAQ

Q:【 Frequently of TPMS sensor】

A: 433mhz

Q: 【Did they tpms sensor need to make program】

A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".

Q:【 Relearn Procedure 】

A:
Relearn Summary:OBD Relearn
Relearn Description
1. Activate all four sensors by reducing tire pressure or with a TPMS tool.
2. Fill the tires to its required pressure.
3. Read all 4 sensors with TPMS tool.
4. Connect TPMS tool to OBD connector.
5. Switch on ignition (engine off).
6. Follow the instructions on the screen.


<kse:widget data-widget-type="relatedProduct" id="24821866" title="" type="relation"></kse:widget>

نقطة بيع

Note1:
الثابتة والمتنقلة استخدام الإعداد السيارة التي قدمناها داخل الجسم من القائمة لتأكيد الإعداد السيارة. إذا لم تتمكن من التأكد من أي منتج يناسب سيارتك ، يرجى إرسال رمز VIN لنا تأكيد ذلك قبل الطلب.

Note2:
【لا متطلبات برمجة المستشعر】: مستشعر ضغط الإطار هو 100% جديد ويأتي مبرمجة مسبقا خصيصا لصنع/نموذج/سنة من السيارة ، تحتاج إلى تفعيلها بواسطة أداة scal أو "إعادة التعلم".
إعادة التعلم المبسطة: OBDII المطلوبة
يوصى بتركيب TPMS فقط من قبل المهنيين المدربين.


مواصفات:
استبدال رقم الجزء:
4250C275 ، S180150004

عمر البطارية: حوالي 3 سنوات
تردد التشغيل: 433MHz


حزمة المحتوى:
حزمة العادية



شاملة مركبة التغطية

عملية التثبيت
1. تخفيف الإطارات: إزالة غطاء صمام ونواة وانكماش الإطارات.
2. تفكيك الإطار: المشبك الإطارات على شاحن الإطارات ، وضبط صمام في الساعة 1 بالنسبة إلى رأس فصل الإطارات. أدخل أداة الإطارات ورفع حبة الإطارات على رأس التركيب لخصم الرأس.
3. تفكيك المستشعر: مع مفك إزالة المسمار الربط وأجهزة الاستشعار من ساق الصمام ، ثم تخفيف الجوز وإزالة الصمام.
4. Mount الاستشعار والصمام: حرك ساق الصمام من خلال ثقب صمام الحافة. قم بتشديد المسمار الجوز مع 4.0 نانومتر بمساعدة دبوس تحديد المواقع. تجميع الجسم الاستشعار ضد الحافة وتشديد المسمار.
5. قم بتركيب الإطار: ضع الإطار على الحافة ، مع التأكد من أن الصمام يواجه رأس الفصل بزاوية 180 درجة. قم بتركيب الإطار فوق الحافة.

تطبيق

لميتسوبيشي Attrage (من 2014-01 إلى 2022-02)
لميتسوبيشي الكسوف الصليب (من 2017-09 إلى 2023-12)
لميتسوبيشي ميراج (من 2013-02 إلى 2022-03)
لميتسوبيشي باجيرو (من 2014-07 إلى 2025-01)
لميتسوبيشي باجيرو سبورت (من 2014-06 إلى 2016-04)
لميتسوبيشي باجيرو سبورت III (من 2016-05 إلى 2024-06)

التعليمات

س: 【 في كثير من الأحيان من TPMS sensor】

A: 433mhz

س: 【هل هم مستشعر تساوي ضغط الإطارات تحتاج إلى جعل المبرمج】

ج: يأتي مستشعر ضغط الإطار مبرمجًا مسبقًا خصيصًا للمركبة/طراز/سنة ، وتحتاج إلى تفعيلها بواسطة أداة scal أو "إعادة التعلم".

س: 【 إعادة تعلم الإجراء 】

A:
إعادة تعلم ملخص: OBD إعادة التعلم
تتعلم الوصف
1. تفعيل جميع أجهزة الاستشعار الأربعة عن طريق تقليل ضغط الإطارات أو باستخدام أداة TPMS.
2. املأ الإطارات لضغطها المطلوب.
3. قراءة جميع أجهزة الاستشعار 4 مع أداة TPMS.
4. Connect أداة TPMS إلى موصل OBD.
5. التبديل على الاشتعال (إيقاف المحرك).
6. اتبع التعليمات على الشاشة.