Sera | Quick Test - 6 Test in 1

Routine monitoring or safety check:

The sera Quick Test provides the optimal possibility to check the most important water parameters (pH value, carbonate hardness, total hardness, nitrate, nitrite and chlorine) in the aquarium with just one test strip quickly and without any problems.

Immerse a test strip in your tank for a second, then wait for 1 minute and compare the intensity of its colors to the chart on the package. A safe procedure that also supports beginners achieve best possible water quality in their aquariums.

In case the measurement reveals deviations from the optimal levels, the sera liquid tests allow determining the differences exactly.

Fig. 1 Completely immerse test strip into the water. Pull out of the water

after 1 second.

Fig. 2 Shake off water. Wait 60 seconds for color stabilization.

Fig. 3 Compare colors on the test strip to the color strips on the container, preferably in daylight. Matching colors indicate the measured value. You can double-check the measuring results with

the very precise sera test liquids.

You will find detailed information about water care in the sera guides

“Systemic aquarium care” and “Systemic pond care” as well as on the

Use only sera test liquids for evaluating water parameters in the sera

online laboratory (www.seralabor.com).