Electric Chain Saw (405-3)

426.09

Product description

Electric Chain Saw (405-3)


Before the operation


1 source of energy

  • Make sure the power pin to be used meets the power requirements on the product information panel.

2 playback product

  • Make sure the ignition is in the OFF position. If the plug is connected to the power meter when the ignition is on, the starter starts When working on a roll, this can cause serious injury.

3 Plug wire

  • If the work is not close to the power source, use a conductor of sufficient thickness and rated ampacity. The connection wire must be shortened.

4 Chain tension compatibility

  • Improper chain tension can damage the chain and guide bar, and make sure the chain is properly tensioned before operating.

5 Fill the oil tank

  • Before shipping this unit without oil in the oil tank, remove the oil tender and fill the tank with contaminated or spoiled motor oil. Check the oil tank frequently and fill it while the saw is running

6 Pat the guide bar and chain

  • Pressing the oil button will pump oil to the guide bar and chain, turn on the saw and press the oil button 3 or 4 times.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌