Electric winch X-BULL XPV with a force of 13500 pounds, operates at 12 volts, equipped with a synthetic rope, suitable for SUVs, jeeps, and trucks.

1800

1999-10%
Out of Stock

Product description

[Features] Our crane features a new generation of wireless remote controls, rated IP67 for water resistance, allowing precise operation from a long distance regardless of terrain or weather conditions. This versatile remote control combines wired and wireless control (up to 35 meters). [Electric Winch] The winch, with a capacity of 13500 pounds, operates with a 12-volt electric motor with series-wound coils of 6.6 horsepower. The new solenoid successfully applies principles of thermal insulation, durability, and high stability, avoiding problems of drum damage or motor burnout caused by insufficient solenoid power. The connection between the clutch and gears has also been enhanced by the new clutch system, reducing the likelihood of clutch damage. [Safety] To ensure optimal load control, there is a motor equipped with "input and output power" feature. It not only supports smooth motor operation within the rated current range without affecting the current but also guarantees the safety of the electric winch and your safety at all times. A 6.6 horsepower three-phase motor, equipped with a planetary gear ratio of 265:1. [Gear System] Thanks to the modern and efficient three-planet gear system, the free-release clutch, and its ability to provide high pulling force under load and high linear speed, this electric winch will be an indispensable companion on your trips. [Installation Dimensions] (Length × Width × Height) 22.83 inches × 5.12 inches × 10.63 inches (580 mm × 130 mm × 270 mm). Mounting screw type: 10.00 ± 0.015 inches × 4.50 ± 0.010 inches. Synthetic rope: 3/8 inch × 92 feet (9.5 mm × 28 m). Specifications - 13500 pound winch. 12-volt DC series-wound electric motor, 6.6 horsepower. Wired / wireless control unit, 12 feet (3.7 meters) long. Gear ratio 265:1. Rope size / 3/8 inch × 92 feet (9.5 mm × 28 m). Battery / 12-volt DC, minimum 650 amps cold start current. Battery cables minimum: gauge 2, 5.9 feet (1.8 meters). IP66 rated - winch and control tools.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌