Red Diamond Rough Ground G.400 17 from FLEXIS

Diamond Felt for Marble Polishing, Red Coarse G.400 "17 from FLEXIS5 steps for polishing and shining floors (marble, tiles, cement floors) with water only. Polishing pad has multiple uses and can be used with different types of equipment: tile cleaning machines, achieve a stunning shine using only water, and is suitable for surface cleaning and polishing operations, gradually increasing brightness making it ideal for various finishes. It can be used with automatic washing devices, low-speed washing machines, manual polishing machines (rocket), and high-speed polishing devices. It is strongly recommended to use it with cleaning machines for daily maintenance in large areas such as shopping centers, supermarkets, airports, hospitals, schools, and homes. First stage: if the floor is very dirty, red felt: G-400 to remove dirt and scratches on marble or very hard floors like concrete and granite. Put water in the work area and pass slowly 10-15 passes per square meter on the surface and rinse the used water. At least 3 stages are needed for good final results. It is recommended to complete the remaining stages, for example: Second stage: blue medium-coarse felt: G-800. For cleaning and removing small impurities, put water in the work area and pass slowly 10-15 passes per square meter on the surface and rinse the used water. Third stage: yellow soft felt G-1500. For smoothing and polishing to achieve a standard brightness level, put water in the work area and pass slowly 10-15 passes per square meter on the surface and rinse the used water. Fourth stage: green soft felt G-3000. To achieve very high gloss results, it is recommended to finish with this ultra-polishing felt. Add clean water to the floor, then pass the green felt until shine appears. Repeat the process if necessary. With this disc, you can reach a gloss level of 100% or more. Fifth stage: ultra-fine gray felt G-8000: for final polishing to give very high shine, used wet or dry, suitable for all types of floors such as vinyl (plastic floors) and all natural and cementitious stones that have been previously polished. Proposed daily maintenance schedule example: hospital entrances, malls, and large departments: Maintain the floor with the green felt G-3000 for daily cleaning of large and small areas. To give the floor a wet shine, use the gray felt G-8000 for large and small areas. Weight: 300g. Portuguese manufacturing from KGSSKU: 100131