Molygen New 5W40 1L

57.50

Out of Stock

Product description

Mobilgen new generation 5W-40 engine oil from Liqui Moly 4 liters - 8578 Low viscosity high-tech engine oil with high shear stability. Along with innovative additive technology and special Molygen additives. Reliably prevents deposit formation, reduces friction losses in the engine, and provides optimal protection against wear. The result is fuel saving and extending engine service life. Features of the new Mobilgen engine oil: - Outstanding engine cleanliness - Excellent behavior at high and low temperatures - Excellent protection against wear - Reliable lubrication performance - High shear stability - Compatible with all commercially available motor oils - Optimal stability over time - Low friction and wear - Instant lubrication after cold start - Tested for turbochargers and catalytic converters - Better for modern gasoline and diesel engines equipped with turbochargers running on exhaust gas and without. To protect the engine and maintain its value during long periods between oil changes and high loads. Application: Observe the operating instructions of vehicle and engine manufacturers. Can be mixed with all commercially available motor oils. Full effectiveness only achieved when used alone (i.e., no mixing). - Friction and wear reducing - Optimum stability to aging - Excellent wear protection - Miscible with all commercially available motor oils - Outstanding lubrication reliability - High shear stability - Tested for turbochargers and catalytic converters - Instant lubrication after cold start LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required: - ACEA A3 - ACEA B4 - API SN - BMW Longlife-01 (up to 2018) - Fiat 9.55535-H2 - Fiat 9.55535-N2 - Fiat 9.55535-Z2 - MB 229.5 - Opel GM-LL-B-025 - Porsche A40 - Renault RN 0700 - Renault RN 0710 - VW 502 00 - VW 505 00 Technical Data: SAE class (engine oils): 5W-40 SAE J 300 Density at 15 °C: 0.850 g/cm³ DIN 51757 Viscosity at 40 °C: 80.7 mm²/s ASTM D 7042-04 Viscosity at 100 °C: 14.0 mm²/s ASTM D 7042-04 Viscosity at -35 °C (MRV): < 60000 mPas ASTM D 4684 Viscosity at -30°C (CCS): <= 6600 mPas ASTM D 5293 Viscosity index: 180 DIN ISO 2909 HTHS at 150°C: >= 3.5 mPas ASTM D 5481 Pour point: -45 °C DIN ISO 3016 Evaporation loss (Noack): 10.0 wt.-% DIN 51581 Flash point: 230 °C DIN ISO 2592 Total base number: 11.3 mg KOH/g DIN ISO 3771 Sulfate ash: 1.0 - 1.6 g/100g DIN 51575 Color / appearance: green, fluorescent AREAS OF APPLICATION Best for modern gasoline and diesel engines with and without exhaust gas turbochargers. For the protection and value retention of the engine during long intervals between oil changes and with high loads. APPLICATION Note the vehicle and engine manufacturers' operating instructions. Can be mixed with all commercially available motor oils. Full effectiveness only achieved when the product is used on its own (i.e., no mixing).

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌