Lickoy Molly engine flush cleaner 8374

Highly effective cleaning fluid for interior engine purification from troublesome deposits. Combined with transport fluids, the set works perfectly with detergents and disinfectant additives distributed to dissolve deposits and varnish components quickly and reliably. All types of soluble in oil and insoluble residues, in suspension, are removed during the next oil change. The engine, cleaned from contamination and deposits, then filled with new oil free of old impurities, can develop its full performance characteristics. Thus, engine wear is reduced and service life is extended. The brand is Liqui Moly. The liquid volume is 300 milliliters. Package information: Bottle. Flash point 63 degrees Celsius. About this item: The fluid removes soluble and insoluble deposits in oil from the suspension system to enable their removal during oil change. It quickly and reliably breaks down sludge and lacquer. Highly effective cleaning fluid for cleaning inside the engine from harmful dirt. The performance of the cleaned engine improves after changing its oil to new, impurity-free oil. Keep the engine interior clean with Liqui Moly engine cleaning fluid. Liqui Moly engine fluid is installed to clean the engine from the inside and eliminate harmful impurities. It improves engine performance by quickly and effectively dissolving clay deposits and varnish. The fluid removes soluble and insoluble deposits in oil from the suspension system for removal during oil change. High performance and efficiency: Liqui Moly engine cleaning fluid can remove old residues and deposits so you can add new oil without impurities, improving overall engine performance. Extends engine life: Liqui Moly engine fluid is designed to clean oil circuits for gasoline and diesel engines. It reduces engine vibrations and increases engine service life. The compact packaging allows easy storage and transport. Used for cleaning and purification of fuel oil cycles and diesel engines. A 300 ml bottle is enough for up to 6 liters of engine oil. It can be safely used in vehicles with timing belt running in oil. Not suitable for use with motorcycles with wet clutches! Danger EUH066, H304, H317. Product description: Combination of active agents made up of special additives and carrier fluid. Brings all types of oil-soluble and oil-insoluble residues into suspension and removes these from the oil circuit during the next oil change. Following this, the engine that has been cleared of deposits and contaminants and the fresh oil can then deliver its full performance. Technical data: Color / appearance yellow, brown. Base additive, carrier liquid. Flash point 63 °C. Pour point -45 °C. Form liquid. Viscosity at 40 °C <7 mm²/s. Odor characteristic. Areas of application: For cleaning and flushing out the oil circuits in gasoline and diesel engines. Use at each oil change. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use in motorcycles with wet clutches! Application: 300 ml sufficient for up to 6 l of oil. Add to the motor oil at operating temperature before the oil change. Then allow engine to idle for approx. 10 minutes. Then change the oil and the filter. Compatible with commercially available motor oils.