Handmade stainless steel coffee grinder 01166

Stainless steel coffee grinder, small coffee mill for travel, silver, size 10*21.5 cm. Stainless steel coffee grinder Size: 10×21.5 cm Weight: 450 grams Material: stainless steel frame, conical ceramic grinder. Get to know the product before first use. Read the following instructions carefully before use and safety instructions. Use this product for its intended purposes. Save these instructions for future reference. Intended use: Use the product only for its designated purposes. Any other use and any modification to the product will be considered improper use. Safety instructions: The plastic bag may be dangerous. To avoid the risk of suffocation, keep packaging materials away from children and infants. Attention: The grinder is not a toy! Keep it out of children's reach. Please use the product as it was designed. Rebuilding or modifying the product damages its safety. Assembly instructions: Before you can enjoy your fresh coffee every day, you need to assemble the coffee grinder. 1. Unscrew the bolt from the grinder. 2. Place the manual handle on the pin shaft and tighten it with the bolt again. 3. The coffee grinder is fully assembled and ready to use. Put some coffee beans into the upper container of the grinder, filling it up to 80%. Do not put more. Continuously turn the manual handle clockwise until resistance decreases. Fresh coffee powder will fall directly into the receiver box, from where you can remove it. Adjusting the grinder: Use the adjustment wheel on the top side below the manual handle. To change the grind size, tighten the bolt and move the manual handle away. Adjust the grind setting by turning the wheel. Turn the wheel counterclockwise (see figure 1) for coarse coffee grinding, and clockwise (see figure 2) for fine powder. Cleaning and maintenance: Clean the outer surface with a soft cloth only. Never put it in water and keep it in a dry place. Clean the grinder with a coarse brush. Avoid contact with water!