Laser Mlay T3

Home laser device Mlay T3 or what is also called (Melesa) 🌟 Enjoy cottony skin while in your home at your full comfort and privacy 💕 # Number of flashes: 500,000 flashes # When flashes end: you can buy a new lens and use it on the same device # Flash energy level: from 1 weak to 5 very strong # Mlay device features 👍🏻✨ Works on long-term hair removal Good quality and lightweight, along with ease of use The lens size is 3.9 cm, suitable for treating different body areas Results appear within 3 months at 90% The device is used wired without waiting for charging The device has 5 energy levels It has automatic flashing feature Possibility to share the device and buy additional lenses There are 3 types of lenses available HR lens for hair removal 500,000 flashes HR lens for bikini hair removal 500,000 flashes HR lens for face hair removal 500,000 flashes 📌Note (must choose the number and type of lenses below) 🤍 One-year warranty 🗓 # Device accessories ✨ • Eye protection glasses worn during the session. • Cotton swabs used for cleaning the lens before and after the session. • Instruction manual and usage instructions. • Device warranty # Questions: Is it suitable for bikini and underarm? Yes, you can use it for the body, bikini, underarm, and face as well. When will I see results? Usually, from the third or fourth session, you start to see results, but the final results appear after completing the full course 💕 And we promise you the best results after 12 sessions 🤩 # Tips before using laser: • Shave hair with a razor one day before the session. • Clean the body from any cosmetics, creams, deodorants, perfumes, or oils before the session. • Use of scrubs, steam baths, saunas, and Moroccan baths is prohibited one week before and one week after the session. • Do not get a tan at least six weeks before the laser session. # How to use the device: 1. Shave hair with a razor 2. Connect power supply, press and hold the power button to turn on 3. Choose the gear that suits your skin, but start from gear one for the first use, and you can increase the gear as your skin adapts 4. Wear glasses 5. Place the lens window of the device close to the skin vertically, wait for the side light to turn on, then press the light button to activate hair removal. The same area can be flashed 1-2 times, but not repeatedly to prevent skin injury 6. If you need to replace the lens, please turn off, disconnect the power, and then replace the lens (please contact us for any inquiries or questions)