Sika Floor 264 SG epoxy flooring
675ر.س
Product description
What is Sikafloor-264? When searching for floor coatings that withstand the harshness of the industrial environment — heavy loads, continuous friction, and daily chemicals — Sikafloor-264 (Sikafloor-264) presents itself as a proven and established option. It is a two-component industrial epoxy paint, applied as a top coat on concrete floors inside factories, warehouses, and heavy traffic areas. Ebad Al-Omran, the authorized distributor of Sika products in Saudi Arabia, provides it to all regions of the Kingdom with specialized technical support. Sikafloor-264 is a product of the global Sika company, legally affiliated with Sika Schweiz AG – Switzerland. It is primarily designed to protect concrete floors in the most demanding industrial environments, relying on a solvent-free formulation (Solvent-Free Epoxy System) — and this alone makes it a conscious choice in sites that require high indoor air quality and worker safety. The result? A durable, glossy finish, reliable mechanical and chemical resistance, and a floor that always looks clean and organized.
- Glossy finish resistant to corrosion
- High mechanical and chemical resistance
- Low VOC (Volatile Organic Compounds)
Main technical specifications of Sikafloor-264
- Sikafloor-264 is a two-component epoxy based on solvent-free epoxy resin. The weight ratio of A to B is approximately 4:1 according to the technical data sheet.
- Pot Life at 20°C ranges between 25 and 35 minutes. Flexural strength is about 20 N/mm², while compressive strength reaches 70 N/mm² or more after 7 days at 20°C.
- Adhesion strength ≥ 1.5 N/mm² according to EN 1542, and Shore D hardness ranges between 75 and 80.
- Recommended layer thickness is 0.6 to 1.0 mm per layer, with a consumption rate of 0.4 to 0.6 kg/m² depending on surface absorption. The VOC content is very low, approximately less than 100 g/l.
- Recoating time between 12 and 24 hours at 20–25°C. Operating temperature up to 60°C for short periods, with application range from +10°C to +30°C.
- The product is applied with a roller, brush, or trowel, providing a colored glossy finish. The surface is ready for light foot traffic after 24 hours, and full load after 7 days.
Practical features and benefits
First: Technical properties
1 - High mechanical resistance
Sikafloor-264 withstands movement of heavy equipment and forklifts in loading areas and production lines. Its ability to resist corrosion and continuous friction makes it suitable for sites where operations do not stop.
2 - Reliable chemical resistance
It resists industrial oils, fuel, some diluted acids, and detergents. This means maintenance workshops and production facilities find a practical solution that reduces long-term maintenance costs.
3 - Easy-to-maintain glossy finish
The smooth surface provided by this coating not only looks good but also facilitates daily cleaning and maintains the appearance of the facility with minimal effort.
4 - Easy application over large areas
Its balanced consistency allows application by roller or trowel, helping field teams complete large spaces efficiently without complications.
5 - Possibility to enhance slip resistance
Quartz sand can be sprinkled on the surface before curing to improve anti-slip properties, which is an essential safety requirement in many industrial environments.
6 - Suitable for hot climates
Operational capacity up to 60°C for short periods makes it suitable for industrial environments in Saudi Arabia, where temperatures inside facilities can rise significantly.
Uses of Sikafloor-264
This product is not designed for a single use case — but is a flexible system serving a wide range of industrial and commercial applications:
- Factories and production lines: epoxy floors capable of bearing loads and continuous friction
- Warehouses and storage facilities: forklift traffic areas
- Loading and unloading zones: surfaces exposed to repeated impacts
- Industrial workshops: resistant to oils and greases
- Food and beverage factories: easy-to-clean floors that meet hygiene standards
- Commercial parking lots: durable, wear-resistant finish
A real-world application example:
In a warehouse with an area of 1500 m² in Riyadh, Sikafloor-264 was applied with an average consumption of 0.5 kg/m² per layer, totaling 750 kg for one layer. After 24 hours, the surface was ready for walking, and after 7 days, forklifts with full loads entered without any issues.
Brief application guide for Sikafloor-264
Proper application is half the success of any flooring system. Here are the basic steps:
1. Surface preparation
Begin by mechanically cleaning the floor (Grinding or Shot Blasting), removing all dust and oils. Ensure compressive strength of concrete ≥ 25 N/mm² and moisture content ≤ 4%. This step determines the quality of everything that follows.
2. Mixing the components
Mix component A with B at a ratio of 4:1 by weight, using a slow-speed mixer for 2–3 minutes until the mixture is fully homogeneous. Do not rush this stage.
3. Application
Apply the material with a roller or trowel at a thickness of 0.6–1 mm according to the specified epoxy floor coating system. In high-load areas, a second coat is recommended to increase thickness and durability.
4. Drying and curing
The surface becomes ready for light foot traffic within 24 hours, and full load after 7 days at 20–25°C. Patience here is an investment in the lifespan of the floor.
Frequently Asked Questions
1. What is the price of Sikafloor-264 in the Saudi market?
Prices vary depending on quantity, area, and the full flooring system required. Several factors influence the final pricing, including the number of coats needed, surface nature, and mechanical preparation requirements. Ebad Al-Omran, the authorized distributor of Sika products in Saudi Arabia, can provide a customized quote including quantity calculations and installation based on your project’s actual area. Contact us for a free technical consultation.
2. Can the product be used in food factories?
Yes, Sikafloor-264 can be used on floors in food and beverage factories, provided that proper application procedures and site hygiene requirements are fully followed. The product provides a smooth, easy-to-clean, and disinfectable surface with good resistance to industrial detergents. It is recommended to discuss site requirements with Ebad Al-Omran’s technical team to select the most suitable system and determine if special additives are needed.
3. How long does the floor last after application?
The lifespan of Sikafloor-264 depends directly on the quality of application and usage conditions. When installed correctly, with an appropriate thickness (0.6–1.0 mm per layer) on a concrete base with a compressive strength ≥ 25 N/mm², the coating can serve for many years under normal conditions. Simple periodic maintenance like regular cleaning and spot re-coating significantly extends the operational life of the floor.
4. Is the product suitable for high temperatures in Saudi Arabia?
Sikafloor-264 withstands operating temperatures up to 60°C for short periods, making it suitable for industrial environments in Saudi Arabia where temperatures inside facilities can rise significantly during summer. The application temperature should be between +10°C and +30°C to ensure optimal quality. For continuous exposure to temperatures above 60°C, consult the technical team to select a more specialized system.
5. What is the material quantity needed per square meter?
Consumption of Sikafloor-264 ranges between 0.4 and 0.6 kg/m² per layer, depending on the absorption level of the concrete surface and desired thickness. For example, in a 1500 m² warehouse, approximately 600 to 900 kg are needed for one layer. For an accurate calculation tailored to your project, Ebad Al-Omran’s team is happy to assist.
6. What is the difference between Sikafloor-264 and Sikafloor-151?
Sikafloor-264 is a colored top coat within the epoxy flooring system, providing durability, aesthetic appeal, and the ability to withstand daily loads. In contrast, Sikafloor-151 is used as an epoxy primer to prepare the concrete surface and improve adhesion before applying the final layers. In other words: Sikafloor-151 prepares the surface, Sikafloor-264 completes the job.
Does your project need a durable industrial floor? Get a site inspection for only 5 riyals with Ebad Al-Omran — we evaluate your surface, calculate quantities, and recommend the most suitable system.
Order Sikafloor-264 now, and also browse Sikafloor-151 from Ebad Al-Omran in Saudi Arabia at the best price — the authorized distributor of Sika products in Saudi Arabia.
We provide genuine products from Sika with specialized technical support and fast delivery for small and large projects. Contact Ebad Al-Omran for direct technical consultation and a customized quote based on your flooring system needs.
Questions you might have

