Learning Set ESP32 Board - Wi-Fi and Bluetooth Controller Module

🧾 List of ESP321 project components. ESP32 development unit, development board for controlling robots and smart projects. 2. 0.96-inch OLED screen, small display for data presentation with resolution 128×64 pixels. 3. Breadboard, 830 points, for assembling and testing circuits without soldering. 4. Infrared obstacle avoidance unit, sensor for detecting obstacles in front of the robot. 5. Photoresistor unit, light sensor for control based on light intensity. 6. DHT11 unit, sensor for measuring temperature and humidity. 7. HC-SR501 unit, motion sensor (PIR) for detecting moving objects. 8. Variable resistor (Potentiometer) 10k, used to control voltage or signal. 9. Micro-USB cable, used to connect the ESP32 board to the computer or power supply. 10. Resistors 1k / 10k / 220Ω (10 pieces of each type) for various projects and adjusting electrical current. 11. Passive buzzer, emits sound when an external signal is activated. 12. Active buzzer, emits sound independently when powered on. 13. 5V dual-channel relay unit, used to turn high-voltage devices on or off. 14. Switch keycaps, 6 buttons for manual control. 15. Dupont connecting wires (Male–Female F–M), 10 wires for connecting modules with ESP32. 16. Dupont connecting wires (Female–Female F–F), 10 wires for connecting modules together. 17. Dupont connecting wires (Male–Male M–M), 10 wires for connecting modules on the board. 18. Red / Blue / Green LEDs (5 of each color), used for lighting or signal testing. 19. RGB LED, multi-color light used in interactive projects.