Surface leakage prevention and ventilation

Sealant spray prevents leakage and surface dampness for engines and mechanical parts in the car. It provides protection and insulation for surfaces, rubber, and plastic. It prevents water, oils, and greasy substances from leaking and preserves the insulated area, protecting it. It prevents dust, liquids, and heat from reaching. Method of use / Insulate the surrounding area of the work site with plastic and paper tape. Clean the area from deposits, oils, and any other obstacles that may affect the effectiveness of the product. After cleaning, dry the area before using the product and ensure hand and face protection. Spray the product on the leak or damp area in multiple layers according to the size of the area and the amount of leakage. Keep the product to dry after each layer for five minutes, then repeat and distribute the spray evenly on the leak area in small and repeated layers. After finishing, leave the product to dry for no less than 3 hours, preferably 12 hours to ensure complete drying. Then remove the plastic surface insulation added to protect the adjacent parts of the leak area and run the car to ensure the leakage or dampness has completely stopped. Note! The product is difficult to remove and only dissolves with kerosene or gasoline, so be careful to avoid contact and prevent it from spreading to unprotected parts.