iPhone 13 Pro Max battery, bod brand

iPhone 13 Pro Max battery, Bod brand

Battery specifications:

• iPhone 13 Pro Max replacement battery
• 100% original Bud brand
• It holds an IECEE test certificate
• It holds the Saudi Standards Recognition Certificate (SASO).
• Two-year warranty

Steps to remove and install the battery:

1. Turn off the phone, unscrew the two screws next to the charging connector
2. Install the screen suction cup, gently pull it up until there is a small gap between the screen and the phone
3. Use the triangle pliers between the gap from one side to the other to separate the screen
4. Unscrew the screen at a 90 degree angle
5. Unscrew the metal bracket covering the battery connector with a screwdriver
6. Disconnect the battery cable from the phone using a prying tool
7. Slowly remove the tape under the battery with the help of tweezers
8. Attach the new adhesive tape to the battery you will be installing, making sure to remove the protective layer
9. Place the battery inside the battery slot, and press it gently to allow the battery to install properly
10. Connect the battery cable and reinstall the metal bracket in place again

Usage information:

• Do not make any modifications to the battery or any part of it or its accessories
• We always recommend that installation be performed by a certified professional
• The battery is stored in a cool and dry place
• Avoid placing the battery in extreme conditions
• Charge the battery when the power is less than 15% for the first five times
• After 5 times completed, it will automatically switch from the batteries standby charging mode to its normal mode
• The battery must be charged at least once when not used for a period longer than 3 months
• If the device gets wet, dry it before using it again
• During charging it is normal for the sensor area of the charging base to generate heat
• If the temperature is greater than 50°C, the charging process will be terminated automatically
• After the phone is fully charged, the temperature will gradually return to normal
• During charging the charging process will be terminated automatically if overvoltage, overcurrent or overtemperature occurs
• When the conditions are restored to normal, the charging process will continue again

Battery safety information:

• Do not throw the battery into fire
• Do not leave the battery unattended while it is charging
• Do not tamper with the battery's internal electrical circuits
• Do not use by children
• Do not use in explosive atmospheres
• Does not use detergents or chemicals
• Do not let the battery completely discharge