Infrared motion sensor with 120-degree angle, wall-mounted, switch box 7*7 cm, range 9 meters

This motion sensor provides a practical solution to make your life easier in many places. This device automatically turns on the light when motion is detected and turns it off after an adjustable time period. Thanks to its easy installation and convenient two-wire connection, it can be used in the living room, kitchen, corridor, office, storage room, and workshop. Sensor features: 120-degree motion detection angle: Provides a wide detection angle to cover the largest possible area. Night/dusk sensor: The dusk switch threshold can be adjusted to determine the brightness level at which the detector should turn on. Automatic on and off: The device turns on the light when motion is detected and turns it off after the set time, saving energy and making it easy to use. Practical adjustment: The device is easily adjusted via a small flap. Adjustable timing: The operating time can be set between 10 seconds and 7 minutes. Flexible installation: Suitable for flat boxes with a diameter of 60 mm and hollow wall sockets with a diameter of 68 mm. Technical data: Detection angle: 120 degrees Detection range: up to 9 meters (at temperatures above 24°C) Time adjustment: from 10 seconds to 7 minutes Power supply: 220-240 volts / 50-60 Hz Load rate: up to 500 watts (for incandescent bulbs) and 200 watts (for energy-saving bulbs) Ambient light: from 10 lux to 2000 lux Installation height: from 1 to 1.8 meters Power consumption: 0.1 watts in standby mode, 0.45 watts during operation Protection grade: IP20, for indoor dry use only Installation dimensions (without frame): 70×70 mm Decorative cover: 85×85 mm My uses: This sensor is ideal for use in: Living room Kitchen Corridor Office Storage room Workshop