Hatch pump (submersible) automatic HAT-AS-800-3S

Description: Hatch pump (submersible) automatic covers up to 3 floors 6 faucets at the same time. The pump contains automatic start and stop without the need for an external controller. The pump's operation system depends on opening and closing the faucets, which significantly contributes to energy saving. When opening the faucet, the pump automatically starts to provide the required water. When closing the faucet, the pump stops working, reducing energy consumption and increasing system efficiency. This smart system ensures water and energy saving, enhances the pump's lifespan, and reduces maintenance costs. It is the ideal solution for homes and irrigation, aiming for sustainability and efficient resource use. Applications: The multi-stage submersible Hatch automatic pump features advanced design with an integrated automatic pressure control switch. It is perfect for many applications, including water supply, drainage, pressurized irrigation, and use in homes, gardening, and plumbing. It also efficiently transfers water between ground and overhead tanks and meets pressure needs for other clean water uses. Pump features: Pump operation is controlled by a pressure sensor and flow switch. Protection against water shortage that automatically stops the pump to prevent damage. Thermal protection. Easy connection and operation design for quick and simple installation. Energy-saving and environmentally friendly design for sustainability. Built-in thermal cut-off. External body made of SS304 stainless steel to ensure durability and rust resistance. Technical specifications: Fluid: clean water or fluid free from solids or fibers. Voltage: 220–240 volts. Frequency: 60 Hz. P1: Power (800W) (1 hp). Current: 4 amps. Motor insulation: F. Motor protection grade: IPX8. Total height (max): 35 m. Max pressure: 3.5 bar. Max flow rate: 100 L/min. Max submersion depth: 7 m. Max liquid temperature: 35 °C. Outlet diameter: 1 inch. Solid particle size: 1 mm. Fan: PPO-GF20. Number of fans: 3. Pump body: SS304 stainless steel. Shaft: SS420. Handle: plastic. Electric cable: 10 meters. Total weight: 11 kg. Packaging dimensions: length 260 × width 210 × height 590 mm. Model: HAT-AS-800-3S. Color: stainless steel / sky blue. Product weight: ±10.5 kg. Product dimensions: 150 × 150 × 535 mm. Country of manufacture: China. Warranty: one year. *Installation instructions – clean water submersible pump: Use a suitable power source – ensure voltage and phase match the pump specifications. Install the pump in clean water only – avoid muddy or sandy areas. Place the pump vertically – ensure the float switch is fully submerged in water. Do not place the pump directly on the bottom. Elevate it about 10–15 cm above the tank or well floor using a stone or base, or hang it with a rope or chain. This prevents sand, mud, or dirt from entering the pump and avoids clogging or damage. Use a rope or chain for lowering – do not lift or carry the pump by the power cable. Install a primary filter to prevent solid particles from entering the pump. Protect electrical connections – keep them dry and waterproof.