KUKI KUHC37CA 30W Fast Wall Charger – USB-C PD and USB-A QC3.0

KUKI KUHC37CA 30W Fast Wall Charger – USB-C PD and USB-A QC3.0

The KUKI KUHC37CA is a 30W fast wall charger featuring a USB Type-C Power Delivery port and a USB-A Quick Charge 3.0 port.

It is suitable for charging compatible phones and USB-powered devices. It can also power various development boards and electronic projects, including Raspberry Pi, ESP32, Arduino Uno, and Arduino Nano, when used with a suitable cable and within the power requirements of each board.

Specifications

• Brand: KUKI
• Model: KUHC37CA
• Product Type: Fast Wall Charger
• Maximum Total Power: 30W
• Number of Ports: 2
• Port 1: USB Type-C PD
• Port 2: USB-A QC3.0
• Input Voltage: AC 100–240V
• Input Frequency: 50/60Hz
• Plug Type: UK Type G
• Color: Black
• Country of Origin: China
• Warranty Printed on Package: 3 Years

USB Type-C PD Output

• 5V/3A
• 9V/3A
• 12V/2.5A
• Maximum Power: 30W

USB-A QC3.0 Output

• 5V/3A
• 9V/3A
• 12V/2.5A
• Maximum Power: 30W

Dual-Port Output

• 5V/3A maximum
• Maximum combined output: 15W when both ports are used according to the specifications printed on the package

Features

• Up to 30W fast-charging power
• USB-C Power Delivery port
• USB-A Quick Charge 3.0 port
• Charges two devices simultaneously
• Intelligent charging control chip
• Supports multiple voltage and current profiles
• Suitable for compatible smartphones and USB devices
• Suitable for Raspberry Pi boards requiring up to 5V/3A
• Suitable for powering ESP32 development boards through USB
• Suitable for powering Arduino Uno through USB
• Suitable for powering Arduino Nano through USB
• Suitable for programming electronics and IoT projects
• Universal AC 100–240V input
• Type G plug suitable for sockets used in Saudi Arabia
• Compact design for home office and project use

Applications

• Charging compatible smartphones
• Charging USB Power Delivery devices
• Charging Quick Charge 3.0 devices
• Powering Raspberry Pi 4 and models operating within 5V/3A
• Powering and programming ESP32 boards
• Powering and programming Arduino Uno
• Powering and programming Arduino Nano
• Powering compatible development boards
• Supplying sensor and IoT projects
• Portable power source for electronic projects
• Home office and laboratory use

Development Board Compatibility

Raspberry Pi

The USB-C port can power Raspberry Pi models that operate at 5V and require no more than 3A, provided that a suitable cable is used.

The charger does not advertise a 5V/5A output for Raspberry Pi 5. The board may operate in a power-limited mode, but this charger is not suitable for delivering the full power and peripheral capacity of Raspberry Pi 5.

ESP32

Suitable for most USB-equipped ESP32 development boards. The board’s onboard voltage regulator converts the USB supply to the voltage required by the microcontroller.

Arduino Uno

Arduino Uno can be powered through its USB port using a suitable cable while observing the total consumption of the board and connected components.

Arduino Nano

Arduino Nano can be powered and programmed through its USB port using the cable type compatible with the specific board version.

Important Notes

• Charging speed depends on the connected device cable and supported charging protocol.
• A compatible cable is required to obtain the maximum 30W output.
• Available power is shared when both ports are used simultaneously.
• Confirm the voltage and current requirements of a development board before connecting it.
• Do not connect the charger directly to a board’s power pins without confirming the required input voltage.

Approximate Weight

Approximately 90 g including the packaging.