Battery wire kit and extra battery charger organizer

3 meters 12 volts ready to perform split charge relay multiple with 12 volts 140 amps smart voltage sensing relay Applications: These sets are suitable for safely charging up to 220AH leisure batteries. These sets are suitable for camping trucks, motorhomes, 4x4s, daily trucks, mobile workshops, cars, or boats. Descriptions: Ohog® voltage sensing systems are particularly suitable for modern vehicles equipped with canbus-controlled wiring, as this type of set does not require ignition feed or any additional wiring. It is a very simple set to install; all you need to do is connect your starting battery to your leisure battery(s) using the provided set, with very easy-to-understand installation instructions and wiring diagram. The electrical voltage sensing relay simply detects the rise in voltage from your vehicle's charging system to allow you to charge the leisure battery(s) while the engine is running. When you turn off your engine, the relay isolates your leisure battery(s) from the main starting battery. So, it does not drain your main starting battery, and you will always be able to start your vehicle. Please note: The 3-meter distances of the available red cable in this set consist of 4 separate wires ready for connectors and heat shrink tubing. The set includes everything you need to set up a dual battery charging system: 12 volts 140 amps smart voltage sensing split charge relay 2 × 250 mm ready-made red cable from the battery to fuse holder wire 1 × 500 mm ready-made red cable, relay to fuse holder wire 1 × 2 meters 70 amp relay to fuse holder wire 1 meter 70 amp ready-made lead ground wire 1 pair of 8 mm battery terminals of another type 2 × MTA MIDI fuse holders 4 × 60A MTA MIDI fuses, including two spare pieces. Heat shrink tubing in red and black to protect all connections. 10 × cable ties 10 × cable tie mounting bases 15 × mounting screws Easy-to-understand installation instructions + after-sales support if needed.