IJOY CAPO SRDA SQUONKER 100W BOX MOD KIT

230

SS Sold out
Out of Stock

Product description

IJOY CAPO SRDA 100W 20700 Squonker kit with battery IJOY reworked its squonker kit and even brought it closer to the wider user base thanks to easily replaceable heating heads. The COMBO SRDA atomizer uses heads reminiscent of DIY decks, but with the difference that you already have pre-built coils and cotton. Just fill it with your e-liquid from the bottle inside the squonker mode, the bottle is mainly made of hard plastic, which makes it easy to insert into the device, but it also has a soft part that makes it easy to squeeze. The CAPO Squonk box mod, unlike regular squonk mods, is adjustable, offering a chip, protections, display, and therefore power settings that go up to 100W (with 18650 battery up to 80W). Five presses of the fire button will turn it on and off, then set the desired wattage with the plus and minus buttons. However, the mod is limited by the maximum battery voltage. Of course, protections are featured: against low resistance, voltage, over-charge, over-discharge, and over-heating. Small dimensions with rounded shapes are perfect, and the mod feels great in hand. The new CAPO Squonk mod is complemented by the COMBO SRDA. The atomizer designed for squonk mods has simply replaceable heating heads with pre-built coils and cotton. Two coils give 0.13Ω resistance, and the recommended wattage is 40W-80W. E-liquid is easily added to the atomizer via the thread and the squonk bottle. The device is designed for direct lung vaping. Contents and specifications: 1x CAPO Squonk Box Mod 1x 20700 3000mAh battery 1x adapter for 18650 battery 1x COMBO SRDA 1x heating head SRDA-CE 0.13Ω (40W-80W) 1x squonk bottle 1x micro USB cable Accessories: Contents may change. Dimensions: 78.2mm x 52.3mm x 30mm Variable wattage: max 100W Variable temperature: 100°C-315°C / 200°F-600°F Supported modes: VW Supported resistance: 0.05Ω-3.0Ω Battery: 18650/20700/21700 (at least 25A) - 20700 included Charging: micro USB port Thread: 510 and spring-loaded contact Bottle volume: 9ml Dimensions: 33.3mm x 25mm Coils: Two Squonk: Yes Thread: 510 Drip tip: 810 (Goon) Battery The compact CAPO Squonk Mod has a cleverly engineered battery slot. It supports three types. In addition to the classic 18650, you can also use the latest 21700 and 20700. The latter is also included in the package, with a capacity of 3000mAh. Display While most squonkers are mechanical mods, CAPO Squonk offers a display, simple wattage setting, and protections that enhance your safety. Charging The Micro USB port allows for fast and easy charging of the battery directly inside the device. SRDA Replaceable heating heads facilitate use of the RDA; this type of atomizer can now be enjoyed by almost everyone. However, it is also possible to buy classic DIY decks and build your own coils. Heating head The pre-built heating head already has two coils with a total resistance of 0.13Ω. Recommended wattage is 40W-80W. No need to worry about the cotton, as it is already in the head. It can, however, be replaced if necessary. Airflow Air flows through side holes to the coils and blends perfectly with the vapor produced, allowing you to enjoy huge clouds and great flavor.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌