BESANTEK BST-CTG03 Coating Thickness Gauge
2127.24ر.س
2363.6ر.س-10%Product description
BESANTEK BST-CTG03 Coating Thickness Gauge
The BESANTEK BST-CTG03 measures coating thickness on ferrous and non-ferrous metal substrates using an integrated probe. It automatically identifies and displays the substrate type. Use it to compare paint readings across vehicle panels or check coating uniformity on metal parts during quality control and maintenance.
Features
The gauge stores the last 10 measurements and has a colour 160 × 128 TFT display. The display can be flipped for easier reading when the instrument is held in the opposite direction. It supports automatic calibration and zero adjustment, micrometre and mil units, automatic power on and off, and a low battery warning.
Technical specifications
| Verified specifications |
| Range: 0–1250 µm or 0–50 mils. Extended reference range: up to 2000 µm or 80 mils. Resolution: 1 µm or 0.1 mil. Rated accuracy: ±(3% of reading + 2 µm) from 0 to 1250 µm. Response time: about 0.6 s. Operating temperature: 0–50 °C. Power: two 1.5 V AAA batteries. Dimensions: 100 × 52 × 29 mm. Stated instrument weight: 68 g. |
Package contents
Gauge, calibration foil set, reference substrate blocks, carrying case, batteries and instruction manual, per the manufacturer catalogue.
How to use
Select the unit, zero the gauge and verify the reading with the reference plate and shim suited to the substrate. Place the probe on the surface and measure several points to compare coating uniformity.
Important Before Purchase
Match the measurement range, instrument function and required accessories to the task before ordering. Review the model manual, operating limits and connection method before use.
Frequently asked questions
Can I measure coatings on steel and aluminium? Yes. The integrated probe supports ferrous and non-ferrous substrates.
Does rated accuracy apply up to 2000 µm? The manufacturer specifies 2000 µm for reference readings and rates accuracy up to 1250 µm.
Recommended Products
- WADFOW WTM1503 Temperature and Humidity Meter — For separate ambient temperature and humidity checks alongside the inspection readings.
- JADEVER Infrared Surface Thermometer — For non contact equipment surface temperature comparisons; it measures a surface, not internal sample temperature.
- JADEVER Metric and Inch Measuring Tape — For short dimensions and manual checks of measurement points on surfaces or around the site.
- WISEUP 16 Inch Tool Bag — To organize small inspection tools during transport; check internal dimensions before packing the instrument and accessories.
- WADFOW 225 mm Magnetic Spirit Level — For checking level and plumb while setting out measurement points and installations.

