BESANTEK BST-CM74 400 A True RMS Clamp Meter

714.80

794.22-10%

Product description

BESANTEK BST-CM74 400 A AC/DC True RMS Clamp Meter

The BST-CM74 combines a clamp for AC and DC current with probes for voltage and continuity checks. It suits electrical and maintenance technicians who need to check the load on a single conductor and then carry out further checks on the circuit using the same instrument.

Key features

  • True RMS for AC measurements within the instrument’s limits.
  • A 30 mm jaw, a backlit display and a hold function for readings taken in tight spaces.
  • Automatic ranging and non-contact voltage detection for preliminary checks.

Specifications

AC/DC current ranges40 A and 400 A
AC/DC voltageUp to 600 V
Frequency10 Hz to 1 MHz
Display4000 counts
PowerThree 1.5 V AAA batteries

The meter measures resistance up to 40 MΩ and supports a temperature input range of −40 to 1000 °C. Observe the temperature limits of the connected probe.

Package contents

According to BESANTEK, the package includes the clamp meter, test leads, temperature probe, carrying bag, batteries and instruction manual.

Applications

Measure current around one conductor, check voltage with the probes and test continuity within the instrument’s limits.

Before purchase

Check the measurement category marked on the instrument and leads against the circuit. NCV is a preliminary indication. To verify isolation, use the approved procedure and an appropriate verification instrument.

FAQ

Can it measure DC current? Yes. The 40 A and 400 A ranges are available for both AC and DC current.

How wide is the jaw opening? 30 mm.

Recommended Products

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌