WADFOW Straight External Circlip Pliers – 228 mm

26

32.5-20%

Product description

WADFOW Straight External Circlip Pliers – 228 mm WPL9C91

The WADFOW WPL9C91 is a 228 mm (9 in) manual circlip plier for external retaining rings, with a straight head and 2 mm tip diameter. Tip diameter is a key measurement for matching the holes in the retaining ring.

The straight head provides a direct approach where space is available in front of the ring. Select the operating direction for the ring type; external and internal circlip pliers serve different retaining rings.

Key Features

  • For external circlips: identifies the retaining ring type to select it for.
  • A straight head determines the direction of approach.
  • 2 mm tips help match the ring holes instead of selecting by tool length alone.
  • Plastic handles provide gripping surfaces while fitting or removing rings.

Technical Specifications

BrandWADFOW
ModelWPL9C91
Product typeStraight External Circlip Pliers
OperationManual
Nominal size228 mm / 9 in
Retaining ring typeExternal
Head shapeStraight
Tip diameter2 mm
Surface treatmentBlack finish and polish

Package Contents

  • 1 × WADFOW WPL9C91 straight external circlip pliers.

Suitable Applications

  • Fitting and removing external retaining rings with holes suitable for the tool tips.
  • Maintaining mechanical assemblies that use the stated ring type, with an appropriate access angle.

Important Information Before Purchase

  • Match the ring type, hole diameter and access angle before purchase; tool length does not state the supported ring diameter.
  • This tool is not offered as convertible between internal and external operation; the listing is for the stated model and direction.
  • Avoid excessive expansion or compression of the ring, and keep the tips seated in the holes during use.

Frequently Asked Questions

Does it work with both internal and external circlips?

This model is intended for external retaining rings. Select the correct direction for the ring.

Is tip diameter the ring diameter?

No. 2 mm is the diameter of the tip that enters the ring hole, not the retaining ring diameter.

Is the head straight or bent?

This model has a straight head. Choose it according to the required access angle.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌