BESANTEK BST-CM71 1000 A AC/DC True RMS Clamp Meter
887.49ر.س
986.1ر.س-10%Product description
BESANTEK BST-CM71 1000 A True RMS AC/DC Clamp Meter
The BESANTEK BST-CM71 measures AC and DC current up to 1000 A through a clamp with a 55 mm opening. It supports true RMS for AC measurements. Use the test leads for voltage, resistance, frequency, continuity and diode checks during electrical maintenance and load troubleshooting.
Features
- Automatic range selection, data hold and backlit LCD.
- 3999-count display with about three updates per second.
- Sleep mode and low-battery warning.
Technical specifications
| Verified specifications |
| AC/DC current ranges: 40, 400 and 1000 A. Rated accuracy: ±(2% of reading + 2 digits) for AC and ±(1.5% of reading + 5 digits) for DC. |
| AC/DC voltage ranges: 400 mV, 4 V, 40 V, 400 V and 600 V. |
| Resistance: up to 40 MΩ. Frequency: up to 10 MHz. Duty cycle: 0.1–99.9%. |
| Maximum jaw opening: 55 mm. Power: one 9 V alkaline battery. |
| Operating temperature: 0–50 °C within the humidity limits in the manual. Dimensions: 285.3 × 105 × 44.5 mm. Weight: approximately 533 g with battery. |
Package contents
Clamp meter, test leads, battery, storage case and instruction manual, per BESANTEK.
How to use
Select AC or DC current and close the jaw around one conductor to measure load current. For voltage and resistance, use the input terminals and mode specified in the manual. A qualified technician should work within the ratings of the meter and leads.
Important Before Purchase
Match the measurement range, instrument function and required accessories to the task before ordering. Review the model manual, operating limits and connection method before use.
Frequently asked questions
Does the clamp measure DC current? Yes, it measures AC and DC current up to 1000 A across its specified ranges.
What is the maximum jaw opening? BESANTEK specifies 55 mm.
Recommended Products
- JADEVER 200 A AC Clamp Meter — For separate load current and voltage measurements during electrical troubleshooting within its ratings.
- JADEVER Non Contact AC Voltage Detector — For preliminary AC voltage detection near wiring; absence of an alert does not verify that a circuit is de energized.
- Three Level AC DC Voltage Tester — For probe based voltage level checks within the tester ratings and the applicable site procedure.
- KYORITSU KEW 3125A Insulation Tester — For insulation resistance testing at the voltage specified by the maintenance procedure, a separate function from voltage presence detection.
- WISEUP 16 Inch Tool Bag — To organize small inspection tools during transport; check internal dimensions before packing the instrument and accessories.

