C45B Brake Disc Lathe for Passenger Cars, 220 V

18399.60

Product description

C45B Brake Disc Lathe for Passenger Cars, 220 V

A workshop lathe for resurfacing brake discs on small passenger cars. The workpiece rotates on the mounting spindle while the linear cross slide guides the cutter across the disc face.

Key Features

  • The 180–450 mm range covers discs within those diameters when a suitable mounting setup is available.
  • A 0.11 mm-per-revolution feed moves the tool across the disc face.
  • A 750 W motor runs on a 220 V single-phase supply.
  • The compact design suits a dedicated brake service station.

Technical Specifications

ModelC45B
Disc diameter180–450 mm
Feed0.11 mm per revolution
Motor power750 W
Power supply220 V single phase
Country of manufactureChina

Package Contents

C45B brake disc lathe.

Suitable Applications

Resurface brake discs on small passenger cars in brake service workshops after checking disc thickness and confirming that the disc can be machined.

Important Before Purchase

Measure the disc diameter and confirm mounting compatibility. Check the minimum thickness specified by the vehicle or disc manufacturer. Replace the disc if machining would take it below that limit.

FAQ

Does it fit every small passenger car? Compatibility depends on disc diameter and mounting. Measure the disc before selecting the machine.

What supply does it require? It runs on a 220 V single-phase supply.

When should I replace the disc? Replace it if its condition requires replacement or if machining would reduce it below the permitted thickness.

Recommended Products

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌