WADFOW Straight Internal Circlip Pliers – 180 mm

16

20-20%

Product description

WADFOW Straight Internal Circlip Pliers – 180 mm WPL9C73

The WADFOW WPL9C73 is a 180 mm (7 in) manual circlip plier for internal retaining rings, with a straight head and 1.8 mm tip diameter. Tip diameter is a key measurement for matching the holes in the retaining ring.

The straight head provides a direct approach where space is available in front of the ring. Select the operating direction for the ring type; external and internal circlip pliers serve different retaining rings.

Key Features

  • For internal circlips: identifies the retaining ring type to select it for.
  • A straight head determines the direction of approach.
  • 1.8 mm tips help match the ring holes instead of selecting by tool length alone.
  • Plastic handles provide gripping surfaces while fitting or removing rings.

Technical Specifications

BrandWADFOW
ModelWPL9C73
Product typeStraight Internal Circlip Pliers
OperationManual
Nominal size180 mm / 7 in
Retaining ring typeInternal
Head shapeStraight
Tip diameter1.8 mm
Surface treatmentBlack finish and polish

Package Contents

  • 1 × WADFOW WPL9C73 straight internal circlip pliers.

Suitable Applications

  • Fitting and removing internal retaining rings with holes suitable for the tool tips.
  • Maintaining mechanical assemblies that use the stated ring type, with an appropriate access angle.

Important Information Before Purchase

  • Match the ring type, hole diameter and access angle before purchase; tool length does not state the supported ring diameter.
  • This tool is not offered as convertible between internal and external operation; the listing is for the stated model and direction.
  • Avoid excessive expansion or compression of the ring, and keep the tips seated in the holes during use.

Frequently Asked Questions

Does it work with both internal and external circlips?

This model is intended for internal retaining rings. Select the correct direction for the ring.

Is tip diameter the ring diameter?

No. 1.8 mm is the diameter of the tip that enters the ring hole, not the retaining ring diameter.

Is the head straight or bent?

This model has a straight head. Choose it according to the required access angle.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌