Toby’s 800 W Power Inverter 12 V DC to 220 V AC Pure Sine Wave

Toby’s 800 W Power Inverter 12 V DC to 220 V AC Pure Sine Wave

The Toby’s 800 W power inverter converts a 12 V DC battery supply to 220 V AC using a pure sine wave output. It combines one AC outlet and one USB port with a cooling fan and metal housing, providing a battery-powered supply for compatible equipment during camping and travel.

Key features

• 1 AC outlet for suitable equipment, within the total supported operating load.
• Charging connections: 1 USB; check the requirements of the device and its port.
• Fan cooling and a metal enclosure help dissipate operating heat.
• Advertised protection functions cover reverse polarity, short circuit, overheating, high voltage, overload, low voltage, overcurrent and impact.

Technical specifications

• Brand: Toby’s
• Advertised power: 800 W
• Input voltage: 12 V DC
• Output voltage: 220 V AC
• Waveform: Pure Sine Wave
• AC outlets: 1
• Charging ports: 1 USB
• Cooling: Built-in fan
• Housing: Magnesium-aluminium alloy
• Connection: Direct battery cables
• Low-voltage protection range: 10–11 V
• High-voltage protection range: 15–16 V
• Advertised conversion efficiency: More than 90%
• Country of origin: China

Package contents

• Toby’s 800 W inverter.
• Battery connection cables with clamps.

Suitable applications

A battery-powered supply for compatible equipment during travel, camping and outdoor use, or as a temporary supply where mains power is unavailable. Select equipment according to its actual electrical demand and the capability of the battery and connection system. An appliance name alone does not establish compatibility.

Before you buy

• 800 W is the advertised product power figure. It alone does not establish a continuous load rating or the ability to start a particular appliance. Follow the operating limits on the unit and in its instructions.
• Check the combined running load, starting demand, voltage and waveform requirements before connection, especially for motor-driven or sensitive electronic equipment.
• Use a suitable 12 V DC battery supply with cables and protective equipment rated for the load. Do not assume a vehicle cigarette-lighter socket can support this advertised power.
• Switch the inverter off before connection, observe polarity and secure all connections. Keep ventilation paths clear and follow the manufacturer’s installation and operating instructions.
• Runtime depends on battery capacity and condition, connected load and conversion efficiency. An inverter converts energy; it is not a self-contained storage battery.

Frequently asked questions

Can it operate without a battery supply?

It needs a suitable 12 V DC source. The listed package contents do not include a storage battery.

Is there a fixed runtime?

No. Runtime depends on available battery energy, the connected load and operating conditions.

Will it run every device below the advertised wattage?

The figure alone is insufficient. Check continuous demand, starting power, waveform requirements and the supply connections.