BESANTEK BST-MGR01 Low Resistance Ohmmeter
8417.45ر.س
9352.72ر.س-10%Product description
BESANTEK BST-MGR01 Four-Terminal Low Resistance Ohmmeter
Use the BST-MGR01 to measure low resistance in electrical contacts, connections and conductors. Two terminals supply the test current and a separate pair senses the voltage drop, reducing the influence of test lead resistance.
Key features
Six ranges cover contact and conductor measurements. A large LCD, automatic hold and automatic shutoff assist field work. Current-lead, potential-lead and temperature indicators flag conditions that may invalidate a reading.
Technical specifications
| Verified specifications |
| Range upper limits are 2, 20 and 200 milliohms, then 2, 20 and 200 ohms. The finest displayed increment is 1 microohm on the 2 milliohm range. Nominal test currents are 1 A, 100 mA and 10 mA, depending on range. Maximum output voltage across C1 and C2 is 10 V. The rechargeable instrument measures 330 × 260 × 160 mm and weighs approximately 3.2 kg with the battery. |
Package contents
The manufacturer lists the instrument, test leads, charger and instruction manual.
Applications
Check the resistance of contacts, joints and conductors during electrical maintenance and compare similar connections under a consistent test procedure.
Before purchase
Select the range and test current for the component under test. Isolate the component and verify absence of voltage before measuring resistance according to the manual and site procedure.
Frequently asked questions
What is the highest range? 200 ohms.
Why use four terminals? Separating voltage sensing from test current reduces the effect of the measurement leads on low-resistance readings.
Recommended Products
- JADEVER 200 A AC Clamp Meter — For separate load current and voltage measurements during electrical troubleshooting within its ratings.
- JADEVER Non Contact AC Voltage Detector — For preliminary AC voltage detection near wiring; absence of an alert does not verify that a circuit is de energized.
- Three Level AC DC Voltage Tester — For probe based voltage level checks within the tester ratings and the applicable site procedure.
- KYORITSU KEW 3125A Insulation Tester — For insulation resistance testing at the voltage specified by the maintenance procedure, a separate function from voltage presence detection.
- WISEUP 16 Inch Tool Bag — To organize small inspection tools during transport; check internal dimensions before packing the instrument and accessories.

