BESANTEK BST-LX2 Digital Light Meter
898.93ر.س
998.81ر.س-10%Product description
BESANTEK BST-LX2 Digital Light Meter
The BESANTEK BST-LX2 measures illuminance at a work surface in lux or foot-candles. Use it to compare lighting at several points in an office or workshop and check how changes to lamp position or settings affect the work surface.
Features
- Automatic and manual range selection.
- Data hold and peak hold for recording readings.
- Silicon photodiode with a protective cover, low-battery warning and automatic shutoff.
Technical specifications
| Verified specifications |
| Lux ranges: 39.99, 399.9, 3,999 and 39,990 lux. |
| Foot-candle ranges: 3.999, 39.99, 399.9 and 3,999 fc. |
| Resolution: 0.01–10 lux or 0.001–1 fc, depending on range. |
| Rated accuracy: ±(3% of reading + 5 digits), calibrated against a reference incandescent lamp at 2856 K. |
| Operating conditions: 0–40 °C and up to 80% relative humidity. Power: one 9 V battery. |
| Dimensions: 194 × 62 × 38 mm. Weight: approximately 255 g with the battery. |
Package contents
Light meter, sensor cover, battery, carrying case and instruction manual, per the BESANTEK catalogue.
How to use
Remove the sensor cover and select the unit and range. Place the sensor at the level of the surface under evaluation without shading it. Repeat at several points with the same orientation and height to compare the lighting distribution.
Important Before Purchase
Match the measurement range, instrument function and required accessories to the task before ordering. Review the model manual, operating limits and connection method before use.
Frequently asked questions
Can I measure in foot-candles? Yes, select fc on the meter.
Is 0.01 lux resolution available on every range? Resolution varies by range. The lowest range provides 0.01 lux resolution.
Recommended Products
- WADFOW WTM1503 Temperature and Humidity Meter — For separate ambient temperature and humidity checks alongside the inspection readings.
- TRIPLETT GSM400 CO2 Temperature and Humidity Meter — For CO2, temperature and humidity checks during indoor environmental surveys; it does not replace a detector for other gases.
- TRIPLETT EPC175 PM2.5 and PM10 Air Quality Meter — For a separate PM2.5 and PM10 particle check during air quality inspections.
- TRIPLETT SLM400 Sound Level Meter — For comparing noise levels near equipment during workplace inspection rounds.
- JADEVER Infrared Surface Thermometer — For non contact equipment surface temperature comparisons; it measures a surface, not internal sample temperature.

