BESANTEK BST-CL01 Cable Locator Kit
4050.90ر.س
4501ر.س-10%Product description
BESANTEK BST-CL01 Cable Locator Kit with Transmitter and Receiver
The BST-CL01 helps electrical technicians trace a cable route and identify individual conductors during installation and maintenance. The transmitter applies a coded signal using the connection method specified in the manual, and the receiver displays the signal strength and code as the technician follows the route.
Key features
Select one of three transmission power levels and choose a signal code. The receiver supports automatic detection or nine manual sensitivity levels. UAC mode detects AC power lines. Both units have a backlit LCD, a flashlight and automatic power-off.
Technical specifications
| Verified specifications |
| The transmitter operates at 125 kHz and measures 12 to 300 V AC or DC. The manufacturer lists a receiver detection depth below 50 cm. Actual detection depends on the route and test conditions. Operating conditions are 0 to 40 °C and up to 80% relative humidity. Each unit uses six AAA batteries. The transmitter measures 188 × 90 × 47 mm and the receiver measures 247 × 78 × 45 mm. |
Package contents
The manufacturer lists the transmitter, receiver, test leads, clips, ground spike, carrying case, batteries and manual.
Applications
Trace cable routes and distinguish a conductor within a group while installing or servicing electrical wiring.
Before purchase
Check the circuit voltage and connection method against the manual. Testing energized circuits is for qualified personnel. Verify absence of voltage with an approved instrument before touching conductors.
Frequently asked questions
Are both units included? Yes, the kit includes a transmitter and a receiver.
Can I adjust receiver sensitivity? Yes. Manual mode offers nine levels, and automatic detection is also available.
Recommended Products
- JADEVER 200 A AC Clamp Meter — For separate load current and voltage measurements during electrical troubleshooting within its ratings.
- JADEVER Non Contact AC Voltage Detector — For preliminary AC voltage detection near wiring; absence of an alert does not verify that a circuit is de energized.
- Three Level AC DC Voltage Tester — For probe based voltage level checks within the tester ratings and the applicable site procedure.
- KYORITSU KEW 3125A Insulation Tester — For insulation resistance testing at the voltage specified by the maintenance procedure, a separate function from voltage presence detection.
- WISEUP 16 Inch Tool Bag — To organize small inspection tools during transport; check internal dimensions before packing the instrument and accessories.

