GALN 4-750BF24 Oil-free Air Compressor 24 L

GALN 4-750BF24 Oil-free Air Compressor 24 L

The GALN 4-750BF24 is an oil-free air compressor with a 24 L tank, 750 W input power and a stated maximum pressure of 8 bar / 115 PSI. Air delivery is listed as 125/150 L/min at 0 bar. This value must be distinguished from the actual air delivery available at a tool’s operating pressure.

Key features

• Oil-free compressor design reduces maintenance associated with compressor oil.
• 24 L receiver stores compressed air within operating limits.
• Stated noise level: 63/65 dB. The machine is not soundless.
• Electrical supply: 220 V / 50–60 Hz, according to this model’s rating.
• Assess tool suitability by comparing required pressure and air consumption with compressor performance.

Technical specifications

• Brand: GALN
• Model: 4-750BF24
• Input power: 750 W
• Voltage and frequency: 220 V / 50–60 Hz
• Tank capacity: 24 L
• Air delivery at 0 bar: 125/150 L/min
• Maximum pressure: 8 bar / 115 PSI
• Noise level: 63/65 dB
• Motor speed: 1400/1700 rpm
• Gross weight: 20 kg
• Package dimensions: 58 × 25 × 53.5 cm

Suitable applications

Workshop maintenance, inflation and cleaning, and pneumatic tools whose pressure and consumption requirements fit the compressor’s performance. Tank capacity alone does not determine suitability.

Before you buy

The listed air delivery is measured at 0 bar; it does not establish delivery at 8 bar. Check the tool’s demand before purchase.

Where two delivery, speed or noise figures are listed, they correspond to 50/60 Hz in the source’s stated order.

Oil-free operation does not establish suitability for breathing air or direct medical use and does not replace application-specific air treatment.

Frequently asked questions

Does oil-free mean maintenance-free?

No. It reduces compressor-oil maintenance, while inspection, cleaning and receiver draining remain subject to the operating instructions.

Is the stated delivery available at maximum pressure?

The stated delivery is measured at 0 bar and should not be treated as confirmed delivery at maximum pressure.

Will it run every pneumatic tool?

Suitability depends on working pressure, air demand and tool duty, not tank size alone.