BESANTEK BST-AFM06 Airflow Environmental Meter
997.28ر.س
1108.09ر.س-10%Product description
BESANTEK BST-AFM06 5-in-1 Environmental Meter for Airflow
The BST-AFM06 combines air velocity and volumetric airflow with light, relative humidity and temperature readings for HVAC and facilities maintenance. Enter the duct or opening area to calculate airflow from the air velocity reading.
Key features
Select one of five air velocity units. View temperature alongside humidity or air velocity, hold the current reading, and zero the light sensor as directed in the manual.
Technical specifications
| Verified specifications |
| Air velocity is 0.4 to 30 m/s. The specified upper airflow limits are 54,000 m³/min and 1,908,400 ft³/min. Area settings in CMM mode span 0.001 to 30 m². Relative humidity is 10 to 95%, light is up to 20,000 lux, and the internal temperature sensor covers 0 to 50 °C. The Type K input supports −100 to 1300 °C. Observe the temperature limits of the connected probe. The meter uses one 9 V battery, measures 156 × 60 × 33 mm and weighs 160 g with the battery. |
Package contents
The manufacturer lists the meter, a Type K temperature probe, a battery and the instruction manual.
Applications
Check airflow at vents and duct openings, compare readings before and after maintenance, and review temperature, humidity and light in service areas.
Before purchase
Check the duct area, required units and expected measurement ranges. Follow the manual when selecting a representative air velocity reading. For Type K measurements, check the limits of the probe used.
Frequently asked questions
How is volumetric airflow calculated? Enter the cross-sectional area in the units required by the selected airflow mode and take a representative velocity reading.
Can the reading be held on the display? Yes, the hold function freezes the current value for review.
Recommended Products
- WADFOW WTM1503 Temperature and Humidity Meter — For separate ambient temperature and humidity checks alongside the inspection readings.
- TRIPLETT GSM400 CO2 Temperature and Humidity Meter — For CO2, temperature and humidity checks during indoor environmental surveys; it does not replace a detector for other gases.
- TRIPLETT EPC175 PM2.5 and PM10 Air Quality Meter — For a separate PM2.5 and PM10 particle check during air quality inspections.
- TRIPLETT SLM400 Sound Level Meter — For comparing noise levels near equipment during workplace inspection rounds.
- JADEVER Infrared Surface Thermometer — For non contact equipment surface temperature comparisons; it measures a surface, not internal sample temperature.

