BESANTEK BST-IT11 1 kV Insulation Tester
1493.64ر.س
1659.6ر.س-10%Product description
BESANTEK BST-IT11 Digital Insulation Resistance Tester, 1 kV
The BST-IT11 measures insulation resistance in wires and cables during electrical maintenance. Technicians can select the test voltage required by their inspection procedure, then use separate modes to check continuity or measure AC voltage.
Key features
Three DC insulation test voltages, a 2,000-count LCD, an external voltage warning and automatic circuit discharge after insulation testing. Continuity mode sounds a buzzer below 10 ohms.
Technical specifications
| Verified specifications |
| Insulation test voltages are 250, 500 and 1,000 V DC. The manufacturer lists insulation resistance ranges up to 200 and 2,000 MΩ, depending on the selected test voltage. Continuity ranges are 20 ohms and 2 kilohms. AC voltage measurement extends to 500 V at 40–120 Hz. The instrument uses eight AA batteries and measures 170 × 165 × 92 mm. It weighs approximately 1,040 g with batteries. |
Package contents
The manufacturer lists the instrument, test leads, shoulder strap, batteries, a 0.5 A 250 V fuse and the instruction manual.
Applications
Check insulation resistance in wiring and cables during maintenance and verify conductor continuity when troubleshooting an electrical fault.
Before purchase
Match the required test voltage to the insulation and the approved procedure. Qualified personnel should isolate the circuit and verify absence of voltage before insulation or continuity testing.
Frequently asked questions
Does it offer a 500 V insulation test? Yes. The available settings are 250, 500 and 1,000 V DC.
Can it measure AC voltage? Yes. Its AC voltage mode reads up to 500 V.
Recommended Products
- JADEVER 200 A AC Clamp Meter — For separate load current and voltage measurements during electrical troubleshooting within its ratings.
- JADEVER Non Contact AC Voltage Detector — For preliminary AC voltage detection near wiring; absence of an alert does not verify that a circuit is de energized.
- Three Level AC DC Voltage Tester — For probe based voltage level checks within the tester ratings and the applicable site procedure.
- KYORITSU KEW 3125A Insulation Tester — For insulation resistance testing at the voltage specified by the maintenance procedure, a separate function from voltage presence detection.
- WISEUP 16 Inch Tool Bag — To organize small inspection tools during transport; check internal dimensions before packing the instrument and accessories.

