Toby’s Q3000 3000 W Power Inverter 12 V DC to 220 V AC Pure Sine Wave
879ر.س
1000ر.س-12%Product description
Toby’s Q3000 3000 W Power Inverter 12 V DC to 220 V AC Pure Sine Wave
The Toby’s Q3000 inverter converts 12 V DC to 220 V AC with a pure sine wave output and an advertised power figure of 3000 W. Its front panel has three AC outlets, three USB-A ports, one Type-C port and an LED display. Two cooling fans help dissipate heat during operation.
Key features
- 3 AC outlets for suitable equipment, within the total supported operating load.
- Charging connections: 3 USB-A + 1 Type-C; check the requirements of the device and its port.
- A front display provides operating information at the inverter.
- Fan cooling and a metal enclosure help dissipate operating heat.
- Advertised protection functions cover overload, overheating, low voltage, high voltage, short circuit and reverse polarity.
Technical specifications
- Brand: Toby’s
- Model: Q3000
- Advertised power: 3000 W
- Input voltage: 12 V DC
- Output voltage: 220 V AC
- Waveform: Pure Sine Wave
- AC outlets: 3
- Charging ports: 3 USB-A + 1 Type-C
- Cooling: Two built-in fans
- Housing: Magnesium-aluminium alloy
- Connection: Direct battery cables
- Display: LED
- Low-voltage protection range: 10–11 V
- High-voltage protection range: 15–16 V
- Advertised conversion efficiency: More than 90%
- Country of origin: China
Package contents
- Toby’s Q3000 3000 W inverter.
- Battery connection cables with clamps.
Suitable applications
A battery-powered supply for compatible equipment during travel, camping and outdoor use, or as a temporary supply where mains power is unavailable. Select equipment according to its actual electrical demand and the capability of the battery and connection system. An appliance name alone does not establish compatibility.
Before you buy
- 3000 W is the advertised product power figure. It alone does not establish a continuous load rating or the ability to start a particular appliance. Follow the operating limits on the unit and in its instructions.
- The three AC outlets share the inverter’s total output; the advertised power is not available independently at each socket.
- Check the combined running load, starting demand, voltage and waveform requirements before connection, especially for motor-driven or sensitive electronic equipment.
- Use a suitable 12 V DC battery supply with cables and protective equipment rated for the load. Do not assume a vehicle cigarette-lighter socket can support this advertised power.
- Switch the inverter off before connection, observe polarity and secure all connections. Keep ventilation paths clear and follow the manufacturer’s installation and operating instructions.
- Runtime depends on battery capacity and condition, connected load and conversion efficiency. An inverter converts energy; it is not a self-contained storage battery.
Frequently asked questions
Can it operate without a battery supply?
It needs a suitable 12 V DC source. The listed package contents do not include a storage battery.
Is there a fixed runtime?
No. Runtime depends on available battery energy, the connected load and operating conditions.
Will it run every device below the advertised wattage?
The figure alone is insufficient. Check continuous demand, starting power, waveform requirements and the supply connections.








