BESANTEK BST-IT810 10 kV Insulation Resistance Tester
11110.81ر.س
12345.34ر.س-10%Product description
BESANTEK BST-IT810 10 kV Insulation Tester
The BESANTEK BST-IT810 tests insulation resistance in wires and cables at four selectable voltages up to 10 kV. It displays polarization index (PI) and dielectric absorption ratio (DAR), and records results for comparison during routine inspections.
Features
Automatic insulation resistance ranging, reading hold and adjustable test duration from 1 to 30 minutes. The meter stores up to 200 results and supports transfer to a computer through its dedicated interface. Audible and visual indicators warn when external voltage reaches the manufacturer’s detection threshold.
Technical specifications
| Verified specifications |
| Insulation test voltages: 1, 2.5, 5 and 10 kV. Corresponding maximum resistance: 2, 5, 10 and 20 TΩ. |
| Voltmeter: 30–600 V AC/DC with 1 V resolution. |
| Short-circuit current: up to 5 mA. Current measurement: 0.5 nA to 0.55 mA depending on insulation resistance. |
| Power: eight 1.5 V alkaline C batteries. Dimensions: 330 × 260 × 160 mm. |
Package contents
Tester, test leads, alligator clip, data cable, software CD, batteries and instruction manual, per BESANTEK.
How to use
A qualified technician should isolate the circuit and verify absence of voltage before insulation testing. Select the test voltage specified for the equipment and follow the tester manual and discharge procedure before touching conductors.
Important Before Purchase
Match the measurement range, instrument function and required accessories to the task before ordering. Review the model manual, operating limits and connection method before use.
Frequently asked questions
How does the test voltage differ from the voltmeter range? The tester applies up to 10 kV in insulation mode. The voltmeter measures 30–600 V AC/DC.
How many results can I retrieve? Up to 200 readings can be recalled from internal memory.
Recommended Products
- JADEVER 200 A AC Clamp Meter — For separate load current and voltage measurements during electrical troubleshooting within its ratings.
- JADEVER Non Contact AC Voltage Detector — For preliminary AC voltage detection near wiring; absence of an alert does not verify that a circuit is de energized.
- Three Level AC DC Voltage Tester — For probe based voltage level checks within the tester ratings and the applicable site procedure.
- KYORITSU KEW 3125A Insulation Tester — For insulation resistance testing at the voltage specified by the maintenance procedure, a separate function from voltage presence detection.
- WISEUP 16 Inch Tool Bag — To organize small inspection tools during transport; check internal dimensions before packing the instrument and accessories.

