Fan hobby complete for GMC Acadia / Traverse 2008/2015

Get perfect cooling that maintains the engine temperature steady with a fan blade designed with aerodynamic technology that reduces wind resistance and improves cooling efficiency to give you safe and quiet driving and reduces fuel consumption with a long service life and lightweight makes maintenance easy and ensures the safety of internal components always. Fan blade specifications: reinforced plastic material with fiberglass to withstand high temperatures and continuous air pressure. Classification: cooling parts. Flange diameter: 430 mm ensures coverage of a wide radiator surface and increases cooling effectiveness. Net weight: 1.1 kg reduces engine load and improves response during constant acceleration. Five inclined blades design reduces noise and provides smooth airflow to protect the thermal sensor. Fully compatible with modern Toyota and GMC car fans and includes original mounting clips. Fan blade features: 1- Increases radiator airflow by up to thirty percent, speeding up coolant temperature reduction and protecting the engine block. 2- Reduces energy consumption thanks to low rotational resistance, making the steering wheel lighter and enhancing fuel economy in cities. 3- Quiet operation without vibration provides passenger comfort and reduces internal bearing wear, extending their lifespan. 4- Corrosion-resistant coating protects the blades from rust and road salts and ensures a shiny appearance throughout summer and rainy seasons. 5- Supports the air conditioning system by maintaining stable compressor pressure, as the fan blade works with the compressor to provide cold air immediately. Installation method: 1- Disconnect the car battery, then lift the front with a stable jack to create a safe working space under the engine. 2- Remove the radiator cover and surrounding belt pulleys, then unscrew the old fan using a torque wrench. 3- Carefully pull the fan from the pump shaft, avoiding contact of the blades with nearby pipes or wires. 4- Place the new unit in position, align the blade direction with the holes, then tighten the bolts with the recommended torque. 5- Reinstall the pulleys, tighten the belt, fill the coolant to the required level, then start the engine to check airflow.