BRODIT 727237 Active holder for fixed installation Apple iPhone 12 Pro Max Apple iPhone 13 Pro

With your mobile in a holder while driving you will always have it within easy sight and reach! And with an active holedr you always have a charged battery when leaving the car. Neat, discreet and convenient! For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB ports: QC 3.0A + 2.4A. It is easy to slide the device in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended.

The adjustable holder fits for devices with skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product.

Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).

Tilt swivel for easy adjustment

This product is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes.

Screws for attachment e.g. onto a ProClip Mounting Platform

4 3x10 mm Phillips screws

Discreet hard wire installation without visible cables

Keep your device in an active holder and you will always have a freshly charged battery! The charging connects automatically when you put the device in the holder. This holder features a straight cord for connection inside the vehicle´s dashboard. The charging box has 2 USB-A ports: Qualcomm Quick Charge 3.0 + 5V/2.4A. Quick charging is device dependent. 12/24V.

Connect the power cable with a 2 A fuse. Professional installation recommended.

Charging specifications:

- Input Molex 2-Pin

- Output Connector Type: Dual USB Type-A Female.

- Output Voltage: 5V, 9V, 12V(Nominal)

- Output Current:

- USB Port 1: QC3.0. 3.6V ~ 6V/3A 6.2-9V/2A 9.2-12V/1.5A (Recommended for Android etc)

- USB Port 2: 4.9V ~ 5.25V 2.4A (Recommended for Apple)

- Output Voltage Ripple: 300mV pk-pk at Max Load

- Input Voltage Range: DC 12--24V DC, Input can handle 40V Load dump translent events

- Input Current: 3.0 A DC Max

- Input Current with No device attached: 0.005A

- DC-DC Conversion Efficiency: Over 86% Typical

- Rated Power:

- USB Port 1: 18 Watts Max.

- USB Port 2: 12 Watts Max.

• Apple iPhone 12 Pro  
• Apple iPhone 12 Pro Max  
• Apple iPhone 12  
• Apple iPhone 13 Pro  
• Apple iPhone 13 Pro Max  
• Apple iPhone 13  
• Apple iPhone 14 Plus  
• Apple iPhone 14 Pro Max  
• Apple iPhone 14