Unlike Corolla automatic transmission Japanese manufacture first grade (2008-2019)

The reverse gear for Toyota Corolla was manufactured in Japan to precisely match the front-wheel drive system and automatic transmission. The shaft is made of flexible steel alloys that absorb vibrations caused by rough roads. The inner and outer heads contain ball bearings lubricated with molybdenum thermal grease that reduces friction heat by 25%, and are covered with high-durability reverse leather that prevents grease leakage even in very hot environments. Gear accuracy: The reverse teeth are manufactured with CNC technology to ensure full compatibility with the transmission opening and the car hub. Speed stability: A mechanically balanced design prevents any steering wobble at high speeds. Signs of reverse gear damage in Toyota Corolla Clicking sound when turning: Appears when turning the steering wheel fully right or left while moving. Vibration when pressing the accelerator: Feeling of vibration at the front of the car that disappears once the foot is lifted off the pedal. Grease marks on the rim: Evidence of reverse leather being cut, leading to damage of the inner joint due to dirt. Steering wheel wobble: Starts at 80 km/h and increases with speed due to slight deviation in the reverse shaft. Advantages of choosing the Japanese reverse gear for your Corolla Cabin quietness: The precise balance in Japanese manufacturing ensures no noise during driving. Economic saving: You get a part that matches the quality of the original but at a lower price, with a warranty to protect you. Perfect match: Designed to fit automatic models (whether 4-speed or CVT) without any modification. Warranty: 3-month replacement warranty against manufacturing noises or vibrations. Compatibility and models This reverse gear is compatible with 1.6L and 1.8L engines for: Toyota Corolla: models from 2008 to 2019. (Please specify the side: right "long" or left "short" when ordering). Installation and maintenance instructions Transmission leather: Always prefer to replace the "reverse leather" to ensure no transmission oil leaks after installation. Transmission oil: Check the oil level after installation, as a small amount of oil may come out when removing the old reverse gear. Alignment: It is recommended to inspect the arm balance after installation to ensure the car is perfectly aligned. Frequently asked questions Does it fit manual transmissions? No, this product is designed for automatic models as the length and number of teeth of the reverse gear differ. Is the part complete? Yes, the reverse gear comes fully assembled (inner head, shaft, and outer head) ready for installation. Does the right side differ from the left? Yes, in Corolla, the right side reverse gear is longer than the left side.