Sports brake pads Impala front and rear 2014-2020 HIGHROAD

HUBS HIGHROAD sports embody the peak in car braking engineering, they are not just a spare part but an integrated cooling system. These hubs rely on heat-treated carbon metal technology to ensure the stability of the molecular structure of the metal under intense pressure. Rust-proofing technology: the hubs are coated with Electrostatic Coating in non-friction areas, providing a strong insulator against moisture and salts, preventing rust formation that spoils the appearance of the rims. Dynamic balance: each hub undergoes precise laser wave balancing to ensure perfect rotation without any mechanical deviation (Millimeter-perfect balance). Performance in harsh conditions (why sports hubs?) High-speed design: at speeds exceeding 120 km/h, kinetic energy doubles into immense heat; here, the "lines" draw hot gases and the "holes" expel them, preventing Brake Fade. Traffic congestion: repeated stops gradually raise hub temperature until the pad surface hardens and makes noise; the planning technique continuously smooths the pad surface to keep it renewed and soft. Mountain obstacles and slopes: continuous brake use on slopes causes "glow" in regular hubs; Highroad patterned hubs dissipate heat 30% faster than traditional hubs, protecting you from sudden brake failure. Brake problem solutions guide (why do you hear sounds?) Squealing sound: often caused by tiny vibrations between the pad and hub, or due to a "glass" layer forming on the pad from heat. Solution: the sports lines in Highroad hubs prevent this layer from forming. Metal grinding sound: indicates the pad material is completely worn out. Solution: replace the pads with ceramic pads (gift) immediately. Pulsation with brakes: caused by hub warping due to "thermal shock" (like washing the car with hot hubs). Solution: heat-treated carbon metal resists this warping with high flexibility. Professional installation instructions Direction base: the internal fin design of the hub is made to draw air from inside to back, so adhere to the labels: (R-Right): passenger side. (L-Left): driver side. Pre-operation cleaning: the hubs are coated with a very thin layer of oil to prevent oxidation during storage; wipe the contact surface with Brake Cleaner to ensure brake response from the first moment. Compatibility with models and gift Cars: Chevrolet Impala (2014 - 2020) in all its variants. Exclusive offer: a set of front and rear hubs + high-performance ceramic pads (front and rear) free of charge for complete quietness and doubled braking power. FAQs Do drilled hubs break quickly? No, Highroad hubs use cast holes, not hand-drilled, with heat treatment to prevent cracks caused by heat. Can I re-machine these hubs in the future? Yes, they can be machined like regular hubs when needed, but thanks to the planning technology, you won't need to machine them for a very long time. Why are only front or rear sold? Because the Impala's braking system relies on hydraulic pressure distribution, changing only one part may cause imbalance in stopping or increased effort on one side. Will the warranty be void if I install them? No, these hubs are considered an upgraded replacement part and are installed directly on the factory bolts without any modification to the vehicle.