Hydraulic assistant for Lexus LX570 original dealership (front or rear) models 2008-2021

The original hydraulic aids for the Lexus LX570 are an integral part of the Active Height Control hydraulic suspension system. These aids work in coordination with the hydraulic pump and nitrogen "accumulators" to adjust the vehicle's height and absorb shocks instantly. They are manufactured according to Toyota/Lexus's highest standards to ensure they withstand the very high oil pressure inside the system and prevent any leaks that could cause the height system to fail. Full compatibility: They connect directly to the height sensors and oil flow rings to ensure quick response when changing driving modes (Comfort / Sport). Manufacturing material: Reinforced steel with thick walls to withstand the heavy weight of the vehicle on rough roads. Signs of hydraulic aid damage in Lexus LX570 pocket: Severe stiffness: Feeling that the vehicle is "very stiff" over bumps, as if it has no suspension system. Vehicle lowering: Noticing one side of the vehicle lowering or the entire vehicle dropping when stationary. Hydraulic oil leakage: Seeing oily, slippery traces (original AHC oil) around the strut or at the connections. Height change failure: Delay in the vehicle or inability to shift from (L) to (N) or (H). AHC warning light: A warning appears on the dashboard indicating a fault in the hydraulic suspension system. Why should only "original" aids be used? AHC system safety: Original aids ensure the preservation of the "hydraulic pump" from damage; counterfeit commercial aids may cause reverse pressure leading to pump burnout (which is a very costly part). True comfort: Only the original aid gives you the feeling of "floating" above the road for which Lexus was designed. Service life: Original aids are designed to last many years under the harshest Gulf conditions. Compatibility and models: This product is compatible with Lexus LX570: all models from 2008 to 2021. (Available for front right/left, and rear right/left). Important technical instructions during installation: Original AHC oil: When replacing the aid, the original Lexus hydraulic oil (Lexus AHC Fluid) must be used and mixed with no other type. Air bleeding: The installation process requires an expert using programming devices and air bleeding from the system to ensure height balance. Accumulator inspection: We always recommend inspecting the hydraulic "balls" or accumulators when changing the aid; if damaged, they may cause rapid damage to the new aid. Frequently Asked Questions: Can regular aids be installed instead of hydraulic ones? We do not recommend this at all because the vehicle is designed with an integrated electronic system, and switching to regular aids causes the vehicle to lose its balance and safety. Are spare aids available? The original aid comes as a complete unit, and if there is a leak, it is preferable to replace it entirely to ensure performance.