Lexus LX570 2008-2015 injector chip

The horn clip (also known as Clock Spring) is the flexible electrical connection ring between the fixed steering column and the moving steering wheel. This clip is manufactured in Japan using high-quality Ribbon Cables that withstand hundreds of thousands of cycles without interruption. Accurate signal transmission: Ensures the transmission of horn signals, cruise control, volume control buttons, and the SRS airbag system without delay or loss of connection. Internal corrosion-resistant materials: The internal conductors are coated with materials that prevent oxidation and ensure continuous electrical current under high-temperature conditions inside the cabin. Signs of horn clip damage in the glove compartment: Horn failure: The horn sound stops completely or only works when turning the steering wheel in a certain direction. Airbag warning light (SRS): The airbag warning light on the dashboard stays on continuously. Steering buttons stop responding: Volume up/down buttons or cruise control do not respond. Friction sounds: A slight "rattling" or plastic friction noise is heard behind the steering wheel when turning. Why choose the Japanese clip for your LX car? Safety first: The Japanese clip guarantees 100% operation of the airbag system in emergencies, unlike poor commercial types. Long lifespan: It withstands continuous steering wheel rotation for many years without the internal wire breaking. Perfect compatibility: Comes with the same original plugs and sizes (Plug & Play) for easy installation and to prevent electrical contact issues. Compatibility and models We have the matching model for each category: LX470: Models from 1998 to 2007. LX570: Models from 2008 to 2015. Important installation instructions Disconnect the battery: The battery terminal must be disconnected 15 minutes before starting installation to avoid accidental airbag deployment. Center point: The new clip comes with a plastic "security lock" that defines the center point; do not remove it until the steering wheel is aligned straight to ensure the clip does not disconnect during the first turn. Seek professional help: We recommend installation by a specialized technician due to the sensitivity of the airbag system. FAQs Does the airbag warning light turn off automatically? Yes, once the correct clip is installed and the plugs are connected, the light will turn off (in some cases, you may need to clear the code with a diagnostic device). Is it Chinese? No, the product is Japanese-made, designed to compete with the quality of the original. Can it be installed on a 2016 model? Models from 2016-2021 have different designs; please provide us with the chassis number to confirm.