Deep lock code with holder

My deep replacement blade with blade holder for the electronic cutting machine LOKLiK. This blade is ideal for heavy materials up to 2.0 mm thick, such as synthetic leather and thick cardboard. It contains two deep blades and a blade holder. With a cutting angle of 60 degrees, this blade can be used on heavy materials, such as synthetic leather, PVC mold boards, EVA foam boards, and magnetic sheets... Whether you are cutting detailed parts or working on different materials, this cutting blade provides the precision you need. Note: These blades are not compatible with the LOKLiK Crafter cutting machine. LOKLiK deep blades use a different blade holder than the basic blades. This blade can be used to cut: synthetic leather, shrinkable plastic sheets, PVC molds, EVA foam boards, magnetic sheets... How to install a new cutting blade in the LOKLiK iCraft™ device: Turn off the device: Make sure the device is completely turned off before starting to replace the blade. Remove the old blade: Carefully open the blade holder by loosening it and remove the old blade. Insert the new cutting blade: Take a new deep blade from the package and place it in the blade holder with the sharp side facing down. Secure the blade holder: Reinstall the blade holder in its place to secure the new blade. Test the blade: Turn on the device and perform a test cut on a scrap piece of material to ensure the blade is installed correctly and functions as expected. Care and maintenance Store unused blades in a dry, safe place to prevent rust and damage. Regular cleaning of the cutting blade and holder can extend their lifespan.